For solar panels as nodes I have been adding two things which could fulfil these criteria:
- A count of solar panel modules (the roughly 1.5 by 1 m individual panels) with generator:solar:modules. - Orientation (as generator:orientation) which can be in degrees or one of the 16 points of the compass. The former is probably the most useful, as it is a good proxy for optimum power capacity (roughly 320-370 W per module) and thus could be used immediately in things like OpenInfraMap. Orientation is just one factor in determining likely actual capacity which would be quite complex. It is useful when an installation spreads over more than one part of the roof. Jerry On Thu, 23 May 2019 at 13:07, Mateusz Konieczny <matkoni...@tutanota.com> wrote: > > > > 23 May 2019, 13:37 by r...@garrett.co.uk: > > On Thu, 23 May 2019 at 11:22, Mateusz Konieczny <matkoni...@tutanota.com> > wrote: > > To fit StreetComplete it must be > > - refining existing objects, not adding new ones > - be solvable by any normal human by answering a simple question > > > One option for this is turning generator=solar nodes into areas. > > Fails "solvable by any normal human by answering a simple question", > it requires drawing a geometry. > > > _______________________________________________ > Talk-GB mailing list > Talk-GB@openstreetmap.org > https://lists.openstreetmap.org/listinfo/talk-gb >
_______________________________________________ Talk-GB mailing list Talk-GB@openstreetmap.org https://lists.openstreetmap.org/listinfo/talk-gb