On Wed, 2 Jan 2019 at 08:56, Alexandre Ratchov <[email protected]> wrote:
> On Tue, Jan 01, 2019 at 11:02:39PM -0000, Christian Weisgerber wrote: > > On 2018-12-31, Alexandre Ratchov <[email protected]> wrote: > > > > > Our current USB sub-system has limitations that currently allow only > > > the following combinations: > > > - USB v2 devices on ehci(4) only > > > - USB v1 devices on uhci(4), ohci(4) or ehci(4) root hub only > > > > > > If you have an audio device that is class compliant (aka vendor claims > > > it's "driverless" on MacOS) *and* one of the above host/hub/device > > > combinations then I'd be very interested in test reports. > > > > Just to clarify: The new driver supports ONLY these combinations. > > > > well, the old one supports only these as well, except that it prints > no error message. > > > The majority of people who have xhci don't need to try: > > uaudio0: xhci(4) not supported yet, try another port > > Thanks for insisting on this. > > Until the xhci driver is finished, those who absolutly want to > test/use the new uaudio driver could try to disable xhci on the boot > prompt. On most machines, ehci will attach instead of xhci. This would > allow using usb 2.0 devices out of the box. To test usb 1.1 devices, > you also need to have a usb connectors on the ehci root hub, certain > machines have them, others don't. On those which have them, there's a > compagnion uhci device, example: > > usb0 at ehci0: USB revision 2.0 > usb1 at uhci0: USB revision 1.0 > usb2 at uhci1: USB revision 1.0 > usb3 at uhci2: USB revision 1.0 > usb4 at uhci3: USB revision 1.0 > uhub0 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev > 1.00/1.00 addr 1 > uhub1 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev > 1.00/1.00 addr 1 > uhub2 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev > 1.00/1.00 addr 1 > uhub3 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev > 1.00/1.00 addr 1 > uhub4 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev > 2.00/1.00 addr 1 > uaudio0 at uhub1 port 1 configuration 1 interface 1 "ABC C-Media USB > Headphone Set" rev 1.10/1.00 addr 2 > uaudio0: class v1, full-speed, sync, channels: 2 play, 1 rec, 8 ctls > Hello Alexandre, and thank you so much for your hard work on this and audio related contributions. I applied the patch, disabled USB3 from BIOS and booted to the newly compiled kernel. When using mpv to play an mp3 file I hear nothing. Tailing dmesg (see below) informs I'm hitting an error. Please let me know if more information is needed. Thanks. $ mixerctl -v -f /dev/mixer1 record.enable=sysctl [ off on sysctl ] $ grep ^sndiod /etc/rc.conf.local sndiod_flags=-f rsnd/1 OpenBSD 6.4-current (GENERIC.MP) #0: Tue Jan 1 22:36:48 EET 2019 [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 8278011904 (7894MB) avail mem = 8017928192 (7646MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xccbfd000 (64 entries) bios0: vendor LENOVO version "N10ET49W (1.28 )" date 12/18/2017 bios0: LENOVO 20CLS06D00 acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP ASF! HPET ECDT APIC MCFG SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT PCCT SSDT UEFI POAT BATB FPDT UEFI DMAR acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP2(S4) XHCI(S3) EHC1(S3) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpiec0 at acpi0 acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz, 798.27 MHz, 06-3d-04 cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN cpu0: 256KB 64b/line 8-way L2 cache cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges cpu0: apic clock running at 99MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz, 798.15 MHz, 06-3d-04 cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN cpu1: 256KB 64b/line 8-way L2 cache cpu1: smt 1, core 0, package 0 cpu2 at mainbus0: apid 2 (application processor) cpu2: Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz, 798.16 MHz, 06-3d-04 cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN cpu2: 256KB 64b/line 8-way L2 cache cpu2: smt 0, core 1, package 0 cpu3 at mainbus0: apid 3 (application processor) cpu3: Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz, 798.15 MHz, 06-3d-04 cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN cpu3: 256KB 64b/line 8-way L2 cache cpu3: smt 1, core 1, package 0 ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins acpimcfg0 at acpi0 acpimcfg0: addr 0xf8000000, bus 0-63 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (PEG_) acpiprt2 at acpi0: bus 2 (EXP1) acpiprt3 at acpi0: bus 3 (EXP2) acpiprt4 at acpi0: bus -1 (EXP3) acpicpu0 at acpi0: C3(200@233 mwait.1@0x40), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu1 at acpi0: C3(200@233 mwait.1@0x40), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu2 at acpi0: C3(200@233 mwait.1@0x40), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu3 at acpi0: C3(200@233 mwait.1@0x40), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpipwrres0 at acpi0: PUBS, resource for XHCI, EHC1 acpipwrres1 at acpi0: NVP3, resource for PEG_ acpipwrres2 at acpi0: NVP2, resource for PEG_ acpitz0 at acpi0: critical temperature is 128 degC acpibtn0 at acpi0: LID_ acpibtn1 at acpi0: SLPB acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001 acpicmos0 at acpi0 acpibat0 at acpi0: BAT0 model "45N1773" serial 109 type LION oem "SANYO" acpibat1 at acpi0: BAT1 model "45N1775" serial 3585 type LION oem "SANYO" acpiac0 at acpi0: AC unit offline acpithinkpad0 at acpi0 "PNP0C14" at acpi0 not configured "PNP0C14" at acpi0 not configured "PNP0C14" at acpi0 not configured "INT340F" at acpi0 not configured acpivideo0 at acpi0: VID_ acpivout at acpivideo0 not configured acpivideo1 at acpi0: VID_ cpu0: Enhanced SpeedStep 798 MHz: speeds: 2601, 2600, 2500, 2300, 2100, 2000, 1800, 1700, 1500, 1400, 1200, 1100, 900, 800, 600, 500 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Core 5G Host" rev 0x09 inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 5500" rev 0x09 drm0 at inteldrm0 inteldrm0: msi inteldrm0: 1920x1080, 32bpp wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) wsdisplay0: screen 1-5 added (std, vt100 emulation) azalia0 at pci0 dev 3 function 0 "Intel Core 5G HD Audio" rev 0x09: msi "Intel 9 Series MEI" rev 0x03 at pci0 dev 22 function 0 not configured em0 at pci0 dev 25 function 0 "Intel I218-LM" rev 0x03: msi, address 68:f7:28:61:6f:a6 azalia1 at pci0 dev 27 function 0 "Intel 9 Series HD Audio" rev 0x03: msi azalia1: codecs: Realtek ALC292 audio0 at azalia1 ppb0 at pci0 dev 28 function 0 "Intel 9 Series PCIE" rev 0xe3: msi pci1 at ppb0 bus 2 rtsx0 at pci1 dev 0 function 0 "Realtek RTS5227 Card Reader" rev 0x01: msi sdmmc0 at rtsx0: 4-bit, dma ppb1 at pci0 dev 28 function 1 "Intel 9 Series PCIE" rev 0xe3: msi pci2 at ppb1 bus 3 iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless AC 7265" rev 0x59, msi ehci0 at pci0 dev 29 function 0 "Intel 9 Series USB" rev 0x03: apic 2 int 23 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 pcib0 at pci0 dev 31 function 0 "Intel 9 Series LPC" rev 0x03 ahci0 at pci0 dev 31 function 2 "Intel 9 Series AHCI" rev 0x03: msi, AHCI 1.3 ahci0: port 0: 6.0Gb/s scsibus1 at ahci0: 32 targets sd0 at scsibus1 targ 0 lun 0: <ATA, INTEL SSDSC2BF36, LTVi> SCSI3 0/direct fixed naa.55cd2e404bde3c69 sd0: 343399MB, 512 bytes/sector, 703282608 sectors, thin ichiic0 at pci0 dev 31 function 3 "Intel 9 Series SMBus" rev 0x03: apic 2 int 18 iic0 at ichiic0 pchtemp0 at pci0 dev 31 function 6 "Intel 9 Series Thermal" rev 0x03 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbdprobe: reset response 0xfe pms0 at pckbc0 (aux slot) wsmouse0 at pms0 mux 0 wsmouse1 at pms0 mux 0 pms0: Synaptics clickpad, firmware 8.1, 0x1e2b1 0x943300 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 vmm0 at mainbus0: VMX/EPT Unclaimed register detected before reading register 0x23a0 uhub1 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.03 addr 2 ugen0 at uhub1 port 7 "Intel Bluetooth" rev 2.01/0.01 addr 3 vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root scsibus3 at softraid0: 256 targets root on sd0a (ce822de83a7969c0.a) swap on sd0b dump on sd0b iwm0: hw rev 0x210, fw ver 16.242414.0, address 60:57:18:6a:df:8d uaudio0 at uhub1 port 2 configuration 1 interface 1 "Cambridge Audio Cambridge Audio USB Audio 2.0" rev 2.00/3.26 addr 4 uaudio0: class v2, high-speed, async, channels: 2 play, 0 rec, 0 ctls audio1 at uaudio0 ugen1 at uhub1 port 2 configuration 1 "Cambridge Audio Cambridge Audio USB Audio 2.0" rev 2.00/3.26 addr 4 uaudio0: request failed: TIMEOUT uaudio0: failed to set clock rate audio1: failed to start playback uaudio0: request failed: TIMEOUT uaudio0: failed to set clock rate audio1: failed to start playback -- Regards, Ville Valkonen
