Hello Anton,
I applied your patch to a recent snapshot; my HID keyboard is an
"oldish" Logitech K400 that I regularly use with the following
usbhidaction config file:
Consumer:Bass 1
sndioctl -f $1 output.mute=!
Consumer:0x00eb 1
sndioctl -f $1 output.level=-0.05
Consumer:Volume_Decrement 1
sndioctl -f $1 output.level=+0.05
(yes, the buttons have very fancy labels...)
None of the multimedia keys work when the device is attached to ucc driver.
Please find enclosed the dmesg with (UCC_DEBUG enabled) and without the
patch; I pressed all keys multiple times and disabled hotplugd (which
launches usbhidaction), just to avoid any interference; I also detached
and reattached the keyboard.
Cheers
On 17/08/2021 20:13, Anton Lindqvist wrote:
Hi,
Here's a new driver for USB HID Consumer Control keyboards. Such
keyboard is a pseudo device which is used to expose audio and
application launch keys. My prime motivation is to get the volume mute,
increment and decrement keys to just work on my keyboard without the
need to use usbhidaction(1).
ucc(4) attaches a wskbd(4) keyboard "on top" making it appear like an
ordinary keyboard, which also makes it possible to inject key
press/release input. It supports both translating and raw mode making it
compatible with the ordinary console and X11.
My keyboard for instance exposes 42 keys in its input report. I only
care about the volume and audio related ones and therefore only added
mappings for those. Additional mappings should be trivial to add if
desired.
Testing would be much appreciated.
Comments? OK?
diff --git share/man/man4/Makefile share/man/man4/Makefile
index 6a0ecb20653..63b33660159 100644
--- share/man/man4/Makefile
+++ share/man/man4/Makefile
@@ -84,7 +84,7 @@ MAN= aac.4 abcrtc.4 abl.4 ac97.4 acphy.4 acrtc.4 \
tlphy.4 thmc.4 tpm.4 tpmr.4 tqphy.4 trm.4 trunk.4 tsl.4 tty.4 \
tun.4 tap.4 twe.4 \
txp.4 txphy.4 uaudio.4 uark.4 uath.4 ubcmtp.4 uberry.4 ubsa.4 \
- ubsec.4 ucom.4 uchcom.4 ucrcom.4 ucycom.4 ukspan.4 uslhcom.4 \
+ ubsec.4 ucc.4 ucom.4 uchcom.4 ucrcom.4 ucycom.4 ukspan.4 uslhcom.4 \
udav.4 udcf.4 udl.4 udp.4 udsbr.4 \
uftdi.4 ugen.4 ugl.4 ugold.4 uguru.4 uhci.4 uhid.4 uhidev.4 uhidpp.4 \
uipaq.4 ujoy.4 uk.4 ukbd.4 \
diff --git share/man/man4/ucc.4 share/man/man4/ucc.4
new file mode 100644
index 00000000000..413c88aa6af
--- /dev/null
+++ share/man/man4/ucc.4
@@ -0,0 +1,45 @@
+.\" $OpenBSD$
+.\"
+.\" Copyright (c) 2021 Anton Lindqvist <[email protected]>
+.\"
+.\" Permission to use, copy, modify, and distribute this software for any
+.\" purpose with or without fee is hereby granted, provided that the above
+.\" copyright notice and this permission notice appear in all copies.
+.\"
+.\" THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+.\" WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+.\" MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+.\" ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+.\" WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+.\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+.\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+.\"
+.Dd $Mdocdate$
+.Dt UCC 4
+.Os
+.Sh NAME
+.Nm ucc
+.Nd Consumer Control keyboards
+.Sh SYNOPSIS
+.Cd "ucc* at uhidev?"
+.Cd "wsbkd* at ucc? mux 1"
+.Sh DESCRIPTION
+The
+.Nm
+driver provides support for Consumer Control pseudo keyboards, often used to
+expose audio and application launch keys.
+.Sh SEE ALSO
+.Xr intro 4 ,
+.Xr uhidev 4 ,
+.Xr usb 4 ,
+.Xr wskbd 4
+.Sh HISTORY
+The
+.Nm
+driver first appeared in
+.Ox 7.0 .
+.Sh AUTHORS
+The
+.Nm
+driver was written by
+.An Anton Lindqvist Aq Mt [email protected] .
diff --git share/man/man4/uhidev.4 share/man/man4/uhidev.4
index 02252789a3f..d398c564bd5 100644
--- share/man/man4/uhidev.4
+++ share/man/man4/uhidev.4
@@ -37,6 +37,7 @@
.Sh SYNOPSIS
.Cd "uhidev* at uhub?"
.Cd "fido* at uhidev?"
+.Cd "ucc* at uhidev?"
.Cd "ucycom* at uhidev?"
.Cd "ugold* at uhidev?"
.Cd "uhid* at uhidev?"
@@ -72,6 +73,7 @@ only dispatches data to them based on the report id.
.Sh SEE ALSO
.Xr fido 4 ,
.Xr intro 4 ,
+.Xr ucc 4 ,
.Xr ucycom 4 ,
.Xr ugold 4 ,
.Xr uhid 4 ,
diff --git share/man/man4/usb.4 share/man/man4/usb.4
index dad3d3a97d9..d159d8b27f3 100644
--- share/man/man4/usb.4
+++ share/man/man4/usb.4
@@ -249,6 +249,8 @@ D-Link DSB-R100 USB radio device
FIDO/U2F security keys
.It Xr ubcmtp 4
Broadcom trackpad mouse
+.It Xr ucc 4
+USB Consumer Control keyboards
.It Xr ugold 4
TEMPer gold HID thermometer and hygrometer
.It Xr uhid 4
diff --git sys/arch/alpha/conf/GENERIC sys/arch/alpha/conf/GENERIC
index 8af652ce301..54d4a45cd4e 100644
--- sys/arch/alpha/conf/GENERIC
+++ sys/arch/alpha/conf/GENERIC
@@ -107,6 +107,8 @@ uslhcom* at uhidev? # Silicon Labs CP2110
USB HID UART
ucom* at uslhcom?
uhid* at uhidev? # USB generic HID support
fido* at uhidev? # FIDO/U2F security key support
+ucc* at uhidev? # Consumer Control keyboards
+wskbd* at ucc? mux 1
ujoy* at uhidev? # USB joystick/gamecontroller support
uhidpp* at uhidev? # Logitech HID++ Devices
upd* at uhidev? # USB Power Devices sensors
diff --git sys/arch/amd64/conf/GENERIC sys/arch/amd64/conf/GENERIC
index c0c16f7c986..0d278739ccf 100644
--- sys/arch/amd64/conf/GENERIC
+++ sys/arch/amd64/conf/GENERIC
@@ -286,6 +286,8 @@ uslhcom* at uhidev? # Silicon Labs CP2110 USB HID
UART
ucom* at uslhcom?
uhid* at uhidev? # USB generic HID support
fido* at uhidev? # FIDO/U2F security key support
+ucc* at uhidev? # Consumer Control keyboards
+wskbd* at ucc? mux 1
ujoy* at uhidev? # USB joystick/gamecontroller support
uhidpp* at uhidev? # Logitech HID++ Devices
upd* at uhidev? # USB Power Devices sensors
diff --git sys/arch/arm64/conf/GENERIC sys/arch/arm64/conf/GENERIC
index ff54bee0a9a..0cb8f4edb05 100644
--- sys/arch/arm64/conf/GENERIC
+++ sys/arch/arm64/conf/GENERIC
@@ -392,6 +392,8 @@ uslhcom* at uhidev? # Silicon Labs CP2110
USB HID UART
ucom* at uslhcom?
uhid* at uhidev? # USB generic HID support
fido* at uhidev? # FIDO/U2F security key support
+ucc* at uhidev? # Consumer Control keyboards
+wskbd* at ucc? mux 1
ujoy* at uhidev? # USB joystick/gamecontroller support
uhidpp* at uhidev? # Logitech HID++ Devices
upd* at uhidev? # USB Power Devices sensors
diff --git sys/arch/armv7/conf/GENERIC sys/arch/armv7/conf/GENERIC
index 1af5eb8dd85..271177bf2ab 100644
--- sys/arch/armv7/conf/GENERIC
+++ sys/arch/armv7/conf/GENERIC
@@ -327,6 +327,8 @@ uslhcom* at uhidev? # Silicon Labs CP2110 USB HID
UART
ucom* at uslhcom?
uhid* at uhidev? # USB generic HID support
fido* at uhidev? # FIDO/U2F security key support
+ucc* at uhidev? # Consumer Control keyboards
+wskbd* at ucc? mux 1
ujoy* at uhidev? # USB joystick/gamecontroller support
uhidpp* at uhidev? # Logitech HID++ Devices
upd* at uhidev? # USB Power Devices sensors
diff --git sys/arch/hppa/conf/GENERIC sys/arch/hppa/conf/GENERIC
index 1a27dbb18c0..91e0888af4c 100644
--- sys/arch/hppa/conf/GENERIC
+++ sys/arch/hppa/conf/GENERIC
@@ -111,6 +111,8 @@ ukbd* at uhidev? # USB keyboard
wskbd* at ukbd? mux 1
uhid* at uhidev? # USB generic HID support
fido* at uhidev? # FIDO/U2F security key support
+ucc* at uhidev? # Consumer Control keyboards
+wskbd* at ucc? mux 1
ujoy* at uhidev? # USB joystick/gamecontroller support
uhidpp* at uhidev? # Logitech HID++ Devices
upd* at uhidev? # USB Power Devices sensors
diff --git sys/arch/i386/conf/GENERIC sys/arch/i386/conf/GENERIC
index b49353a92d0..7e3144dba53 100644
--- sys/arch/i386/conf/GENERIC
+++ sys/arch/i386/conf/GENERIC
@@ -284,6 +284,8 @@ uticom* at uhub? # TI serial
ucom* at uticom?
uhid* at uhidev? # USB generic HID support
fido* at uhidev? # FIDO/U2F security key support
+ucc* at uhidev? # Consumer Control keyboards
+wskbd* at ucc? mux 1
ujoy* at uhidev? # USB joystick/gamecontroller support
uhidpp* at uhidev? # Logitech HID++ Devices
upd* at uhidev? # USB Power Devices sensors
diff --git sys/arch/landisk/conf/GENERIC sys/arch/landisk/conf/GENERIC
index a2091413514..133218afe22 100644
--- sys/arch/landisk/conf/GENERIC
+++ sys/arch/landisk/conf/GENERIC
@@ -137,6 +137,8 @@ uslhcom* at uhidev? # Silicon Labs CP2110 USB HID
UART
ucom* at uslhcom?
uhid* at uhidev? # USB generic HID support
fido* at uhidev? # FIDO/U2F security key support
+ucc* at uhidev? # Consumer Control keyboards
+wskbd* at ucc? mux 1
ujoy* at uhidev? # USB joystick/gamecontroller support
uhidpp* at uhidev? # Logitech HID++ Devices
upd* at uhidev? # USB Power Devices sensors
diff --git sys/arch/loongson/conf/GENERIC sys/arch/loongson/conf/GENERIC
index d213bd976f9..f3ab1b34cf1 100644
--- sys/arch/loongson/conf/GENERIC
+++ sys/arch/loongson/conf/GENERIC
@@ -164,6 +164,8 @@ uslhcom* at uhidev? # Silicon Labs CP2110 USB HID
UART
ucom* at uslhcom?
uhid* at uhidev? # USB generic HID support
fido* at uhidev? # FIDO/U2F security key support
+ucc* at uhidev? # Consumer Control keyboards
+wskbd* at ucc? mux 1
ujoy* at uhidev? # USB joystick/gamecontroller support
uhidpp* at uhidev? # Logitech HID++ Devices
upd* at uhidev? # USB Power Devices sensors
diff --git sys/arch/macppc/conf/GENERIC sys/arch/macppc/conf/GENERIC
index 34014204a23..872e74601a2 100644
--- sys/arch/macppc/conf/GENERIC
+++ sys/arch/macppc/conf/GENERIC
@@ -260,6 +260,8 @@ uslhcom* at uhidev? # Silicon Labs CP2110 USB HID
UART
ucom* at uslhcom?
uhid* at uhidev? # USB generic HID support
fido* at uhidev? # FIDO/U2F security key support
+ucc* at uhidev? # Consumer Control keyboards
+wskbd* at ucc? mux 1
ujoy* at uhidev? # USB joystick/gamecontroller support
uhidpp* at uhidev? # Logitech HID++ Devices
upd* at uhidev? # USB Power Devices sensors
diff --git sys/arch/octeon/conf/GENERIC sys/arch/octeon/conf/GENERIC
index ec5424938cb..260b5fda752 100644
--- sys/arch/octeon/conf/GENERIC
+++ sys/arch/octeon/conf/GENERIC
@@ -156,6 +156,8 @@ uslhcom* at uhidev? # Silicon Labs CP2110 USB HID
UART
ucom* at uslhcom?
uhid* at uhidev? # USB generic HID support
fido* at uhidev? # FIDO/U2F security key support
+ucc* at uhidev? # Consumer Control keyboards
+wskbd* at ucc? mux 1
ujoy* at uhidev? # USB joystick/gamecontroller support
uhidpp* at uhidev? # Logitech HID++ Devices
upd* at uhidev? # USB Power Devices sensors
diff --git sys/arch/powerpc64/conf/GENERIC sys/arch/powerpc64/conf/GENERIC
index 5a41fb2ae72..311355bce1a 100644
--- sys/arch/powerpc64/conf/GENERIC
+++ sys/arch/powerpc64/conf/GENERIC
@@ -127,6 +127,8 @@ uslhcom* at uhidev? # Silicon Labs CP2110 USB HID
UART
ucom* at uslhcom?
uhid* at uhidev? # USB generic HID support
fido* at uhidev? # FIDO/U2F security key support
+ucc* at uhidev? # Consumer Control keyboards
+wskbd* at ucc? mux 1
ujoy* at uhidev? # USB joystick/gamecontroller support
uhidpp* at uhidev? # Logitech HID++ Devices
upd* at uhidev? # USB Power Devices sensors
diff --git sys/arch/sparc64/conf/GENERIC sys/arch/sparc64/conf/GENERIC
index 71e92dc9016..757a637cc09 100644
--- sys/arch/sparc64/conf/GENERIC
+++ sys/arch/sparc64/conf/GENERIC
@@ -224,6 +224,8 @@ umsm* at uhub? # Qualcomm MSM EVDO
ucom* at umsm?
uhid* at uhidev? # USB generic HID support
fido* at uhidev? # FIDO/U2F security key support
+ucc* at uhidev? # Consumer Control keyboards
+wskbd* at ucc? mux 1
ujoy* at uhidev? # USB joystick/gamecontroller support
uhidpp* at uhidev? # Logitech HID++ Devices
upd* at uhidev? # USB Power Devices sensors
diff --git sys/dev/hid/hid.h sys/dev/hid/hid.h
index dd9586d7cc2..23f8f7979ec 100644
--- sys/dev/hid/hid.h
+++ sys/dev/hid/hid.h
@@ -397,6 +397,9 @@ int hid_is_collection(const void *, int, uint8_t, int32_t);
/* Usages, Consumer */
#define HUC_CONTROL 0x0001
+#define HUC_TRACK_NEXT 0x00b5
+#define HUC_TRACK_PREV 0x00b6
+#define HUC_STOP 0x00b7
#define HUC_PLAY_PAUSE 0x00cd
#define HUC_MUTE 0x00e2
#define HUC_VOL_INC 0x00e9
diff --git sys/dev/usb/files.usb sys/dev/usb/files.usb
index 4d79c5ea21a..c4c4688f00e 100644
--- sys/dev/usb/files.usb
+++ sys/dev/usb/files.usb
@@ -488,3 +488,8 @@ file dev/usb/umstc.c umstc
device uhidpp: hid
attach uhidpp at uhidbus
file dev/usb/uhidpp.c uhidpp
+
+# Consumer Control Keyboards
+device ucc: hid, wskbddev
+attach ucc at uhidbus
+file dev/usb/ucc.c ucc
diff --git sys/dev/usb/ucc.c sys/dev/usb/ucc.c
new file mode 100644
index 00000000000..8eb82a09cfd
--- /dev/null
+++ sys/dev/usb/ucc.c
@@ -0,0 +1,470 @@
+/* $OpenBSD$ */
+
+/*
+ * Copyright (c) 2021 Anton Lindqvist <[email protected]>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <sys/param.h>
+#include <sys/systm.h>
+#include <sys/device.h>
+#include <sys/malloc.h>
+
+#include <dev/usb/usb.h>
+#include <dev/usb/usbhid.h>
+#include <dev/usb/usbdi.h>
+#include <dev/usb/uhidev.h>
+
+#include <dev/wscons/wsconsio.h>
+#include <dev/wscons/wskbdvar.h>
+#include <dev/wscons/wsksymdef.h>
+#include <dev/wscons/wsksymvar.h>
+
+/* #define UCC_DEBUG */
+#ifdef UCC_DEBUG
+#define DPRINTF(x...) do { if (ucc_debug) printf(x); } while (0)
+void ucc_dump(const char *, u_char *, u_int);
+int ucc_debug = 1;
+#else
+#define DPRINTF(x...)
+#define ucc_dump(prefix, data, len)
+#endif
+
+struct ucc_softc {
+ struct uhidev sc_hdev;
+ struct device *sc_wskbddev;
+
+ /* Key mappings used in translating mode. */
+ keysym_t *sc_map;
+ u_int sc_maplen;
+ u_int sc_mapsiz;
+ u_int sc_nkeys;
+
+ /* Key mappings used in raw mode. */
+ struct ucc_keyraw *sc_raw;
+ u_int sc_rawlen;
+ u_int sc_rawsiz;
+
+ int sc_mode;
+
+ /* Last pressed key. */
+ union {
+ int sc_last_translate;
+ u_char sc_last_raw;
+ };
+
+ struct wscons_keydesc sc_keydesc[2];
+ struct wskbd_mapdata sc_keymap;
+};
+
+struct ucc_keysym {
+ int32_t us_usage;
+ keysym_t us_key;
+ u_char us_raw;
+};
+
+struct ucc_keyraw {
+ u_int ur_bit;
+ u_char ur_raw;
+};
+
+int ucc_match(struct device *, void *, void *);
+void ucc_attach(struct device *, struct device *, void *);
+int ucc_detach(struct device *, int);
+void ucc_intr(struct uhidev *, void *, u_int);
+
+void ucc_attach_wskbd(struct ucc_softc *);
+int ucc_enable(void *, int);
+void ucc_set_leds(void *, int);
+int ucc_ioctl(void *, u_long, caddr_t, int, struct proc *);
+
+int ucc_parse_hid(struct ucc_softc *, void *, int);
+int ucc_bit_to_raw(struct ucc_softc *, u_int, u_char *);
+int ucc_usage_to_sym(int32_t, const struct ucc_keysym **);
+void ucc_raw_to_scancode(u_char *, int *, u_char, int);
+void ucc_input(struct ucc_softc *, u_int, int);
+void ucc_rawinput(struct ucc_softc *, u_char, int);
+int ucc_setbits(u_char *, int, u_int *);
+
+struct cfdriver ucc_cd = {
+ NULL, "ucc", DV_DULL
+};
+
+const struct cfattach ucc_ca = {
+ sizeof(struct ucc_softc),
+ ucc_match,
+ ucc_attach,
+ ucc_detach,
+};
+
+/*
+ * Mapping of HID consumer control usages to key symbols.
+ * The raw scan codes are taken from X11, see the media_common symbols in
+ * dist/xkeyboard-config/symbols/inet.
+ * Then use dist/xkeyboard-config/keycodes/xfree86 to resolve keys to the
+ * corrensponding raw scan code.
+ */
+static const struct ucc_keysym ucc_keysyms[] = {
+ { HUC_MUTE, KS_AudioMute, 0 },
+ { HUC_VOL_INC, KS_AudioRaise, 0 },
+ { HUC_VOL_DEC, KS_AudioLower, 0 },
+ { HUC_TRACK_NEXT, 0, 153 /* I19 = XF86AudioNext */ },
+ { HUC_TRACK_PREV, 0, 144 /* I10 = XF86AudioPrev */ },
+ { HUC_STOP, 0, 164 /* I24 = XF86AudioStop */ },
+ { HUC_PLAY_PAUSE, 0, 162 /* I22 = XF86AudioPlay,
XF86AudioPause */ },
+};
+
+int
+ucc_match(struct device *parent, void *match, void *aux)
+{
+ struct uhidev_attach_arg *uha = (struct uhidev_attach_arg *)aux;
+ void *desc;
+ int size;
+
+ uhidev_get_report_desc(uha->parent, &desc, &size);
+ if (!hid_is_collection(desc, size, uha->reportid,
+ HID_USAGE2(HUP_CONSUMER, HUC_CONTROL)))
+ return UMATCH_NONE;
+
+ return UMATCH_IFACECLASS;
+}
+
+void
+ucc_attach(struct device *parent, struct device *self, void *aux)
+{
+ struct ucc_softc *sc = (struct ucc_softc *)self;
+ struct uhidev_attach_arg *uha = (struct uhidev_attach_arg *)aux;
+ void *desc;
+ int error, repid, size;
+
+ sc->sc_mode = WSKBD_TRANSLATED;
+ sc->sc_last_translate = -1;
+
+ sc->sc_hdev.sc_intr = ucc_intr;
+ sc->sc_hdev.sc_parent = uha->parent;
+ sc->sc_hdev.sc_udev = uha->uaa->device;
+ sc->sc_hdev.sc_report_id = uha->reportid;
+
+ uhidev_get_report_desc(uha->parent, &desc, &size);
+ repid = uha->reportid;
+ sc->sc_hdev.sc_isize = hid_report_size(desc, size, hid_input, repid);
+ sc->sc_hdev.sc_osize = hid_report_size(desc, size, hid_output, repid);
+ sc->sc_hdev.sc_fsize = hid_report_size(desc, size, hid_feature, repid);
+
+ error = ucc_parse_hid(sc, desc, size);
+ if (error) {
+ printf(" hid error %d\n", error);
+ return;
+ }
+
+ printf(" keys %d, mappings %d\n", sc->sc_nkeys, sc->sc_rawlen);
+
+ /* Cannot load an empty map. */
+ if (sc->sc_maplen > 0)
+ ucc_attach_wskbd(sc);
+}
+
+int
+ucc_detach(struct device *self, int flags)
+{
+ struct ucc_softc *sc = (struct ucc_softc *)self;
+ int error = 0;
+
+ if (sc->sc_wskbddev != NULL)
+ error = config_detach(sc->sc_wskbddev, flags);
+ uhidev_close(&sc->sc_hdev);
+ free(sc->sc_map, M_USBDEV, sc->sc_mapsiz);
+ free(sc->sc_raw, M_USBDEV, sc->sc_rawsiz);
+ return error;
+}
+
+void
+ucc_intr(struct uhidev *addr, void *data, u_int len)
+{
+ struct ucc_softc *sc = (struct ucc_softc *)addr;
+ int raw = sc->sc_mode == WSKBD_RAW;
+ u_int bit = 0;
+
+ ucc_dump(__func__, data, len);
+
+ if (ucc_setbits(data, len, &bit)) {
+ /* All zeroes, assume key up event. */
+ if (raw) {
+ if (sc->sc_last_raw != 0) {
+ ucc_rawinput(sc, sc->sc_last_raw, 1);
+ sc->sc_last_raw = 0;
+ }
+ } else {
+ if (sc->sc_last_translate != -1) {
+ ucc_input(sc, sc->sc_last_translate, 1);
+ sc->sc_last_translate = -1;
+ }
+ }
+ return;
+ }
+ if (bit >= sc->sc_nkeys)
+ goto unknown;
+
+ if (raw) {
+ u_char c;
+
+ if (ucc_bit_to_raw(sc, bit, &c))
+ goto unknown;
+ if (c != 0) {
+ ucc_rawinput(sc, c, 0);
+ sc->sc_last_raw = c;
+ return;
+ }
+
+ /*
+ * The pressed key does not have a corresponding raw scan code
+ * which implies that wsbkd must handle the pressed key as if
+ * being in translating mode, hence the fall through. This is
+ * only the case for volume related keys.
+ */
+ }
+
+ ucc_input(sc, bit, 0);
+ if (!raw)
+ sc->sc_last_translate = bit;
+ return;
+
+unknown:
+ DPRINTF("%s: unknown key: bit %d\n", __func__, bit);
+}
+
+void
+ucc_attach_wskbd(struct ucc_softc *sc)
+{
+ static const struct wskbd_accessops accessops = {
+ .enable = ucc_enable,
+ .set_leds = ucc_set_leds,
+ .ioctl = ucc_ioctl,
+ };
+ struct wskbddev_attach_args a = {
+ .console = 0,
+ .keymap = &sc->sc_keymap,
+ .accessops = &accessops,
+ .accesscookie = sc,
+ };
+
+ sc->sc_keydesc[0].name = KB_US;
+ sc->sc_keydesc[0].base = 0;
+ sc->sc_keydesc[0].map_size = sc->sc_maplen;
+ sc->sc_keydesc[0].map = sc->sc_map;
+ sc->sc_keymap.keydesc = sc->sc_keydesc;
+ sc->sc_keymap.layout = KB_US | KB_DEFAULT;
+ sc->sc_wskbddev = config_found(&sc->sc_hdev.sc_dev, &a, wskbddevprint);
+}
+
+int
+ucc_enable(void *v, int on)
+{
+ struct ucc_softc *sc = (struct ucc_softc *)v;
+ int error = 0;
+
+ if (on)
+ error = uhidev_open(&sc->sc_hdev);
+ else
+ uhidev_close(&sc->sc_hdev);
+ return error;
+}
+
+void
+ucc_set_leds(void *v, int leds)
+{
+}
+
+int
+ucc_ioctl(void *v, u_long cmd, caddr_t data, int flag, struct proc *p)
+{
+ struct ucc_softc *sc = (struct ucc_softc *)v;
+
+ switch (cmd) {
+#ifdef WSDISPLAY_COMPAT_RAWKBD
+ case WSKBDIO_SETMODE:
+ sc->sc_mode = *((int *)data);
+ return 0;
+#endif
+ }
+
+ return -1;
+}
+
+/*
+ * Parse the HID report and construct a mapping between the bits in the input
+ * report and the corresponding pressed key.
+ */
+int
+ucc_parse_hid(struct ucc_softc *sc, void *desc, int descsiz)
+{
+ struct hid_item hi;
+ struct hid_data *hd;
+ int isize;
+
+ /*
+ * The size of the input report is expressed in bytes where each bit in
+ * turn represents a pressed key. It's likely that the number of keys is
+ * less than this generous estimate.
+ */
+ isize = sc->sc_hdev.sc_isize * 8;
+ if (isize == 0)
+ return ENXIO;
+
+ /*
+ * Create mapping between each input bit and the corresponding key used
+ * in translating mode. Two entries are needed per bit in order
+ * construct a mapping.
+ */
+ sc->sc_mapsiz = isize * 2 * sizeof(*sc->sc_map);
+ sc->sc_map = mallocarray(isize, 2 * sizeof(*sc->sc_map), M_USBDEV,
+ M_WAITOK | M_ZERO);
+
+ /*
+ * Create mapping between each input bit and the corresponding scan
+ * code used in raw mode.
+ */
+ sc->sc_rawsiz = isize * sizeof(*sc->sc_raw);
+ sc->sc_raw = mallocarray(isize, sizeof(*sc->sc_raw), M_USBDEV,
+ M_WAITOK | M_ZERO);
+
+ hd = hid_start_parse(desc, descsiz, hid_input);
+ while (hid_get_item(hd, &hi)) {
+ const struct ucc_keysym *us;
+ int bit;
+
+ if (HID_GET_USAGE_PAGE(hi.usage) != HUP_CONSUMER ||
+ HID_GET_USAGE(hi.usage) == HUC_CONTROL)
+ continue;
+
+ bit = sc->sc_nkeys++;
+ if (ucc_usage_to_sym(HID_GET_USAGE(hi.usage), &us))
+ continue;
+
+ if (sc->sc_maplen + 2 >= sc->sc_mapsiz)
+ return ENOMEM;
+ sc->sc_map[sc->sc_maplen++] = KS_KEYCODE(bit);
+ sc->sc_map[sc->sc_maplen++] = us->us_key;
+
+ if (sc->sc_rawlen + 1 >= sc->sc_rawsiz)
+ return ENOMEM;
+ sc->sc_raw[sc->sc_rawlen].ur_bit = bit;
+ sc->sc_raw[sc->sc_rawlen].ur_raw = us->us_raw;
+ sc->sc_rawlen++;
+
+ DPRINTF("%s: bit %d, usage %0x, key %0x\n", __func__,
+ bit, HID_GET_USAGE(hi.usage), us->us_key);
+ }
+ hid_end_parse(hd);
+
+ return 0;
+}
+
+int
+ucc_bit_to_raw(struct ucc_softc *sc, u_int bit, u_char *raw)
+{
+ u_int i;
+
+ for (i = 0; i < sc->sc_rawlen; i++) {
+ const struct ucc_keyraw *ur = &sc->sc_raw[i];
+
+ if (ur->ur_bit == bit) {
+ *raw = ur->ur_raw;
+ return 0;
+ }
+ }
+ return 1;
+}
+
+int
+ucc_usage_to_sym(int32_t usage, const struct ucc_keysym **us)
+{
+ int len = nitems(ucc_keysyms);
+ int i;
+
+ for (i = 0; i < len; i++) {
+ if (ucc_keysyms[i].us_usage == usage) {
+ *us = &ucc_keysyms[i];
+ return 0;
+ }
+ }
+ return 1;
+}
+
+void
+ucc_input(struct ucc_softc *sc, u_int bit, int release)
+{
+ int s;
+
+ s = spltty();
+ wskbd_input(sc->sc_wskbddev,
+ release ? WSCONS_EVENT_KEY_UP : WSCONS_EVENT_KEY_DOWN, bit);
+ splx(s);
+}
+
+void
+ucc_rawinput(struct ucc_softc *sc, u_char c, int release)
+{
+ u_char buf[2];
+ int len = 0;
+ int s;
+
+ if (c & 0x80)
+ buf[len++] = 0xe0;
+ buf[len++] = c & 0x7f;
+ if (release)
+ buf[len - 1] |= 0x80;
+
+ s = spltty();
+ wskbd_rawinput(sc->sc_wskbddev, buf, len);
+ splx(s);
+}
+
+int
+ucc_setbits(u_char *data, int len, u_int *bit)
+{
+ int i, j;
+
+ for (i = 0; i < len; i++) {
+ if (data[i] == 0)
+ continue;
+
+ for (j = 0; j < 8; j++) {
+ if (data[i] & (1 << j)) {
+ *bit = (i * 8) + j;
+ return 0;
+ }
+ }
+ }
+
+ return 1;
+}
+
+#ifdef UCC_DEBUG
+
+void
+ucc_dump(const char *prefix, u_char *data, u_int len)
+{
+ u_int i;
+
+ if (ucc_debug == 0)
+ return;
+
+ printf("%s:", prefix);
+ for (i = 0; i < len; i++)
+ printf(" %02x", data[i]);
+ printf("\n");
+}
+
+#endif
--
Alessandro De Laurenzis
[mailto:[email protected]]
Web: http://www.atlantide.mooo.com
LinkedIn: http://it.linkedin.com/in/delaurenzis
OpenBSD 6.9-current (GENERIC.MP) #171: Sat Aug 7 19:31:34 MDT 2021
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8239386624 (7857MB)
avail mem = 7973724160 (7604MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xdae9c000 (68 entries)
bios0: vendor LENOVO version "G1ETB8WW (2.78 )" date 09/19/2018
bios0: LENOVO 2349KT5
acpi0 at bios0: ACPI 5.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC TCPA SSDT SSDT SSDT HPET APIC MCFG ECDT FPDT ASF!
UEFI UEFI POAT SSDT SSDT DMAR UEFI DBG2
acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP3(S4) XHCI(S3) EHC1(S3)
EHC2(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz, 2594.48 MHz, 06-3a-09
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz, 2594.12 MHz, 06-3a-09
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xf8000000, bus 0-63
acpiec0 at acpi0
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG_)
acpiprt2 at acpi0: bus 2 (EXP1)
acpiprt3 at acpi0: bus 3 (EXP2)
acpiprt4 at acpi0: bus 4 (EXP3)
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpicmos0 at acpi0
acpibat0 at acpi0: BAT0 model "45N1001" serial 2729 type LION oem "SANYO"
acpiac0 at acpi0: AC unit online
"LEN0078" at acpi0 not configured
acpithinkpad0 at acpi0: version 1.0
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpicpu0 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PUBS, resource for XHCI, EHC1, EHC2
acpitz0 at acpi0: critical temperature is 200 degC
acpivideo0 at acpi0: VID_
acpivout0 at acpivideo0: LCD0
acpivideo1 at acpi0: VID_
cpu0: using VERW MDS workaround (except on vmm entry)
cpu0: Enhanced SpeedStep 2594 MHz: speeds: 2601, 2600, 2500, 2400, 2300, 2200,
2100, 2000, 1900, 1800, 1700, 1600, 1500, 1400, 1300, 1200 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09
drm0 at inteldrm0
inteldrm0: msi, IVYBRIDGE, gen 7
xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00
addr 1
"Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address
00:21:cc:d7:43:44
ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 16
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi
azalia0: codecs: Realtek ALC269, Intel/0x2806, using Realtek ALC269
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
pci1 at ppb0 bus 2
sdhc0 at pci1 dev 0 function 0 "Ricoh 5U823 SD/MMC" rev 0x04: apic 2 int 16
sdhc0: SDHC 3.0, 50 MHz base clock
sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma
ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi
pci2 at ppb1 bus 3
iwn0 at pci2 dev 0 function 0 "Intel Centrino Ultimate-N 6300" rev 0x3e: msi,
MIMO 3T3R, MoW, address 24:77:03:d8:9c:74
ppb2 at pci0 dev 28 function 2 "Intel 7 Series PCIE" rev 0xc4: msi
pci3 at ppb2 bus 4
ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
pcib0 at pci0 dev 31 function 0 "Intel QM77 LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI 1.3
ahci0: port 0: 6.0Gb/s
ahci0: port 1: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, KINGSTON SA400S3, R010> naa.50026b77823f81ef
sd0: 228936MB, 512 bytes/sector, 468862128 sectors, thin
cd0 at scsibus1 targ 1 lun 0: <HL-DT-ST, DVDRAM GT50N, LT20> removable
ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics touchpad, firmware 7.2, 0x1c0b1 0xb40000 0x0 0xd047b1 0xa0000
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
dt: 445 probes
umodem0 at uhub0 port 4 configuration 1 interface 1 "Lenovo H5321 gw" rev
2.00/0.00 addr 2
umodem0: data interface 2, has CM over data, has break
umodem0: status change notification available
ucom0 at umodem0
umodem1 at uhub0 port 4 configuration 1 interface 3 "Lenovo H5321 gw" rev
2.00/0.00 addr 2
umodem1: data interface 4, has CM over data, has break
umodem1: status change notification available
ucom1 at umodem1
umodem2 at uhub0 port 4 configuration 1 interface 9 "Lenovo H5321 gw" rev
2.00/0.00 addr 2
umodem2: data interface 10, has CM over data, has break
umodem2: status change notification available
ucom2 at umodem2
ugen0 at uhub0 port 4 configuration 1 "Lenovo H5321 gw" rev 2.00/0.00 addr 2
uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev
2.00/0.00 addr 2
ugen1 at uhub3 port 1 "Lenovo Integrated Smart Card Reader" rev 2.00/1.00 addr 3
uhub4 at uhub3 port 2 configuration 1 interface 0 "VIA Labs, Inc. USB2.0 Hub"
rev 2.10/7.04 addr 4
umass0 at uhub4 port 1 configuration 1 interface 0 "SanDisk Ultra Fit" rev
2.10/1.00 addr 5
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <SanDisk, Ultra Fit, 1.00> removable
serial.07815583061206119374
sd1: 14663MB, 512 bytes/sector, 30031250 sectors
uaudio0 at uhub4 port 2 configuration 1 interface 1 "Creative Labs Creative
Bluetooth Audio W2" rev 2.00/1.00 addr 6
uaudio0: class v1, full-speed, sync, channels: 2 play, 1 rec, 0 ctls
audio1 at uaudio0
uhidev0 at uhub4 port 2 configuration 1 interface 3 "Creative Labs Creative
Bluetooth Audio W2" rev 2.00/1.00 addr 6
uhidev0: iclass 3/0, 3 report ids
uhid0 at uhidev0 reportid 1: input=2, output=0, feature=0
uhid1 at uhidev0 reportid 2: input=18, output=18, feature=0
uhid2 at uhidev0 reportid 3: input=64, output=64, feature=0
uhidev1 at uhub4 port 4 configuration 1 interface 0 "Logitech USB Receiver" rev
2.00/12.01 addr 7
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
uhidev2 at uhub4 port 4 configuration 1 interface 1 "Logitech USB Receiver" rev
2.00/12.01 addr 7
uhidev2: iclass 3/1, 8 report ids
ums0 at uhidev2 reportid 2: 16 buttons, Z and W dir
wsmouse2 at ums0 mux 0
uhid3 at uhidev2 reportid 3: input=4, output=0, feature=0
uhid4 at uhidev2 reportid 4: input=1, output=0, feature=0
uhid5 at uhidev2 reportid 8: input=1, output=0, feature=0
uhidev3 at uhub4 port 4 configuration 1 interface 2 "Logitech USB Receiver" rev
2.00/12.01 addr 7
uhidev3: iclass 3/0, 33 report ids
uhidpp0 at uhidev3 reportid 16 device 1 keyboard "K400" serial 3a-2d-18-5e
uhid6 at uhidev3 reportid 32: input=14, output=14, feature=0
uhid7 at uhidev3 reportid 33: input=31, output=31, feature=0
uvideo0 at uhub3 port 6 configuration 1 interface 0 "Chicony Electronics Co.,
Ltd. Integrated Camera" rev 2.00/5.64 addr 8
video0 at uvideo0
uhub5 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev
2.00/0.00 addr 2
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd0a (7a2ec63fbc88653a.a) swap on sd0b dump on sd0b
WARNING: clock gained 4 days
WARNING: CHECK AND RESET THE DATE!
inteldrm0: 1366x768, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
iwn0: fatal firmware error
iwn0: fatal firmware error
iwn0: fatal firmware error
iwn0: fatal firmware error
iwn0: fatal firmware error
iwn0: fatal firmware error
iwn0: fatal firmware error
iwn0: fatal firmware error
iwn0: fatal firmware error
iwn0: fatal firmware error
iwn0: fatal firmware error
iwn0: fatal firmware error
iwn0: fatal firmware error
iwn0: fatal firmware error
iwn0: fatal firmware error
iwn0: fatal firmware error
iwn0: fatal firmware error
iwn0: fatal firmware error
iwn0: fatal firmware error
iwn0: fatal firmware error
iwn0: fatal firmware error
iwn0: fatal firmware error
iwn0: fatal firmware error
iwn0: fatal firmware error
ucom0 detached
umodem0 detached
ucom1 detached
umodem1 detached
ucom2 detached
umodem2 detached
ugen0 detached
uhub0 detached
ugen1 detached
sd1 detached
scsibus2 detached
umass0 detached
audio1 detached
uaudio0 detached
uhid0 detached
uhid1 detached
uhid2 detached
uhidev0 detached
wskbd1: disconnecting from wsdisplay0
wskbd1 detached
ukbd0 detached
uhidev1 detached
wsmouse2 detached
ums0 detached
uhid3 detached
uhid4 detached
uhid5 detached
uhidev2 detached
uhidpp0 detached
uhid6 detached
uhid7 detached
uhidev3 detached
uhub4 detached
video0 detached
uvideo0 detached
uhub3 detached
uhub1 detached
uhub5 detached
uhub2 detached
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00
addr 1
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
uhidev0 at uhub0 port 4 configuration 1 interface 0 "Lenovo H5321 gw" rev
2.00/1.00 addr 2
uhidev0: no report descriptor
uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev
2.00/0.00 addr 2
ugen0 at uhub3 port 1 "Lenovo Integrated Smart Card Reader" rev 2.00/1.00 addr 3
uvideo0 at uhub3 port 6 configuration 1 interface 0 "Chicony Electronics Co.,
Ltd. Integrated Camera" rev 2.00/5.64 addr 4
video0 at uvideo0
uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev
2.00/0.00 addr 2
uhidev0 detached
umodem0 at uhub0 port 4 configuration 1 interface 1 "Lenovo H5321 gw" rev
2.00/0.00 addr 2
umodem0: data interface 2, has CM over data, has break
umodem0: status change notification available
ucom0 at umodem0
umodem1 at uhub0 port 4 configuration 1 interface 3 "Lenovo H5321 gw" rev
2.00/0.00 addr 2
umodem1: data interface 4, has CM over data, has break
umodem1: status change notification available
ucom1 at umodem1
umodem2 at uhub0 port 4 configuration 1 interface 9 "Lenovo H5321 gw" rev
2.00/0.00 addr 2
umodem2: data interface 10, has CM over data, has break
umodem2: status change notification available
ucom2 at umodem2
ugen1 at uhub0 port 4 configuration 1 "Lenovo H5321 gw" rev 2.00/0.00 addr 2
syncing disks... done
rebooting...
OpenBSD 6.9-current (GENERIC) #0: Sat Aug 21 12:43:46 CEST 2021
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 8239386624 (7857MB)
avail mem = 7973826560 (7604MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xdae9c000 (68 entries)
bios0: vendor LENOVO version "G1ETB8WW (2.78 )" date 09/19/2018
bios0: LENOVO 2349KT5
acpi0 at bios0: ACPI 5.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC TCPA SSDT SSDT SSDT HPET APIC MCFG ECDT FPDT ASF!
UEFI UEFI POAT SSDT SSDT DMAR UEFI DBG2
acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP3(S4) XHCI(S3) EHC1(S3)
EHC2(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz, 2594.58 MHz, 06-3a-09
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xf8000000, bus 0-63
acpiec0 at acpi0
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG_)
acpiprt2 at acpi0: bus 2 (EXP1)
acpiprt3 at acpi0: bus 3 (EXP2)
acpiprt4 at acpi0: bus 4 (EXP3)
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpicmos0 at acpi0
acpibat0 at acpi0: BAT0 model "45N1001" serial 2729 type LION oem "SANYO"
acpiac0 at acpi0: AC unit online
"LEN0078" at acpi0 not configured
acpithinkpad0 at acpi0: version 1.0
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpicpu0 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PUBS, resource for XHCI, EHC1, EHC2
acpitz0 at acpi0: critical temperature is 200 degC
acpivideo0 at acpi0: VID_
acpivout0 at acpivideo0: LCD0
acpivideo1 at acpi0: VID_
cpu0: using VERW MDS workaround (except on vmm entry)
cpu0: Enhanced SpeedStep 2594 MHz: speeds: 2601, 2600, 2500, 2400, 2300, 2200,
2100, 2000, 1900, 1800, 1700, 1600, 1500, 1400, 1300, 1200 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09
drm0 at inteldrm0
inteldrm0: msi, IVYBRIDGE, gen 7
xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00
addr 1
"Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address
00:21:cc:d7:43:44
ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 16
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi
azalia0: codecs: Realtek ALC269, Intel/0x2806, using Realtek ALC269
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
pci1 at ppb0 bus 2
sdhc0 at pci1 dev 0 function 0 "Ricoh 5U822 SD/MMC" rev 0x07: apic 2 int 16
sdhc0: SDHC 3.0, 50 MHz base clock
sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma
ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi
pci2 at ppb1 bus 3
iwn0 at pci2 dev 0 function 0 "Intel Centrino Ultimate-N 6300" rev 0x3e: msi,
MIMO 3T3R, MoW, address 24:77:03:d8:9c:74
ppb2 at pci0 dev 28 function 2 "Intel 7 Series PCIE" rev 0xc4: msi
pci3 at ppb2 bus 4
ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
pcib0 at pci0 dev 31 function 0 "Intel QM77 LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI 1.3
ahci0: port 0: 6.0Gb/s
ahci0: port 1: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, KINGSTON SA400S3, R010> naa.50026b77823f81ef
sd0: 228936MB, 512 bytes/sector, 468862128 sectors, thin
cd0 at scsibus1 targ 1 lun 0: <HL-DT-ST, DVDRAM GT50N, LT20> removable
ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics touchpad, firmware 7.2, 0x1c0b1 0xb40000 0x0 0xd047b1 0xa0000
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
dt: 445 probes
umodem0 at uhub0 port 4 configuration 1 interface 1 "Lenovo H5321 gw" rev
2.00/0.00 addr 2
umodem0: data interface 2, has CM over data, has break
umodem0: status change notification available
ucom0 at umodem0
umodem1 at uhub0 port 4 configuration 1 interface 3 "Lenovo H5321 gw" rev
2.00/0.00 addr 2
umodem1: data interface 4, has CM over data, has break
umodem1: status change notification available
ucom1 at umodem1
umodem2 at uhub0 port 4 configuration 1 interface 9 "Lenovo H5321 gw" rev
2.00/0.00 addr 2
umodem2: data interface 10, has CM over data, has break
umodem2: status change notification available
ucom2 at umodem2
ugen0 at uhub0 port 4 configuration 1 "Lenovo H5321 gw" rev 2.00/0.00 addr 2
uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev
2.00/0.00 addr 2
ugen1 at uhub3 port 1 "Lenovo Integrated Smart Card Reader" rev 2.00/1.00 addr 3
uvideo0 at uhub3 port 6 configuration 1 interface 0 "Chicony Electronics Co.,
Ltd. Integrated Camera" rev 2.00/5.64 addr 4
video0 at uvideo0
uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev
2.00/0.00 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (7a2ec63fbc88653a.a) swap on sd0b dump on sd0b
inteldrm0: 1366x768, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
uhidev0 at uhub3 port 2 configuration 1 interface 0 "Logitech USB Receiver" rev
2.00/12.01 addr 5
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub3 port 2 configuration 1 interface 1 "Logitech USB Receiver" rev
2.00/12.01 addr 5
uhidev1: iclass 3/1, 8 report ids
ums0 at uhidev1 reportid 2: 16 buttons, Z and W dir
wsmouse2 at ums0 mux 0
ucc0 at uhidev1 reportid 3 keys 1, mappings 0
uhid0 at uhidev1 reportid 4: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 8: input=1, output=0, feature=0
uhidev2 at uhub3 port 2 configuration 1 interface 2 "Logitech USB Receiver" rev
2.00/12.01 addr 5
uhidev2: iclass 3/0, 33 report ids
uhidpp0 at uhidev2 reportid 16 device 1 keyboard "K400" serial 3a-2d-18-5e
uhid2 at uhidev2 reportid 32: input=14, output=14, feature=0
uhid3 at uhidev2 reportid 33: input=31, output=31, feature=0
wskbd1: disconnecting from wsdisplay0
wskbd1 detached
ukbd0 detached
uhidev0 detached
wsmouse2 detached
ums0 detached
ucc0 detached
uhid0 detached
uhid1 detached
uhidev1 detached
uhidpp0 detached
uhid2 detached
uhid3 detached
uhidev2 detached
uhidev0 at uhub3 port 2 configuration 1 interface 0 "Logitech USB Receiver" rev
2.00/12.01 addr 5
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub3 port 2 configuration 1 interface 1 "Logitech USB Receiver" rev
2.00/12.01 addr 5
uhidev1: iclass 3/1, 8 report ids
ums0 at uhidev1 reportid 2: 16 buttons, Z and W dir
wsmouse2 at ums0 mux 0
ucc0 at uhidev1 reportid 3 keys 1, mappings 0
uhid0 at uhidev1 reportid 4: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 8: input=1, output=0, feature=0
uhidev2 at uhub3 port 2 configuration 1 interface 2 "Logitech USB Receiver" rev
2.00/12.01 addr 5
uhidev2: iclass 3/0, 33 report ids
uhidpp0 at uhidev2 reportid 16 device 1 keyboard "K400" serial 3a-2d-18-5e
uhid2 at uhidev2 reportid 32: input=14, output=14, feature=0
uhid3 at uhidev2 reportid 33: input=31, output=31, feature=0
syncing disks...
OpenBSD 6.9-current (GENERIC) #1: Sat Aug 21 13:17:05 CEST 2021
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 8239386624 (7857MB)
avail mem = 7973826560 (7604MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xdae9c000 (68 entries)
bios0: vendor LENOVO version "G1ETB8WW (2.78 )" date 09/19/2018
bios0: LENOVO 2349KT5
acpi0 at bios0: ACPI 5.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC TCPA SSDT SSDT SSDT HPET APIC MCFG ECDT FPDT ASF!
UEFI UEFI POAT SSDT SSDT DMAR UEFI DBG2
acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP3(S4) XHCI(S3) EHC1(S3)
EHC2(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz, 2594.56 MHz, 06-3a-09
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xf8000000, bus 0-63
acpiec0 at acpi0
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG_)
acpiprt2 at acpi0: bus 2 (EXP1)
acpiprt3 at acpi0: bus 3 (EXP2)
acpiprt4 at acpi0: bus 4 (EXP3)
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpicmos0 at acpi0
acpibat0 at acpi0: BAT0 model "45N1001" serial 2729 type LION oem "SANYO"
acpiac0 at acpi0: AC unit online
"LEN0078" at acpi0 not configured
acpithinkpad0 at acpi0: version 1.0
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpicpu0 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PUBS, resource for XHCI, EHC1, EHC2
acpitz0 at acpi0: critical temperature is 200 degC
acpivideo0 at acpi0: VID_
acpivout0 at acpivideo0: LCD0
acpivideo1 at acpi0: VID_
cpu0: using VERW MDS workaround (except on vmm entry)
cpu0: Enhanced SpeedStep 2594 MHz: speeds: 2601, 2600, 2500, 2400, 2300, 2200,
2100, 2000, 1900, 1800, 1700, 1600, 1500, 1400, 1300, 1200 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09
drm0 at inteldrm0
inteldrm0: msi, IVYBRIDGE, gen 7
xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00
addr 1
"Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address
00:21:cc:d7:43:44
ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 16
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi
azalia0: codecs: Realtek ALC269, Intel/0x2806, using Realtek ALC269
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
pci1 at ppb0 bus 2
sdhc0 at pci1 dev 0 function 0 "Ricoh 5U822 SD/MMC" rev 0x07: apic 2 int 16
sdhc0: SDHC 3.0, 50 MHz base clock
sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma
ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi
pci2 at ppb1 bus 3
iwn0 at pci2 dev 0 function 0 "Intel Centrino Ultimate-N 6300" rev 0x3e: msi,
MIMO 3T3R, MoW, address 24:77:03:d8:9c:74
ppb2 at pci0 dev 28 function 2 "Intel 7 Series PCIE" rev 0xc4: msi
pci3 at ppb2 bus 4
ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
pcib0 at pci0 dev 31 function 0 "Intel QM77 LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI 1.3
ahci0: port 0: 6.0Gb/s
ahci0: port 1: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, KINGSTON SA400S3, R010> naa.50026b77823f81ef
sd0: 228936MB, 512 bytes/sector, 468862128 sectors, thin
cd0 at scsibus1 targ 1 lun 0: <HL-DT-ST, DVDRAM GT50N, LT20> removable
ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics touchpad, firmware 7.2, 0x1c0b1 0xb40000 0x0 0xd047b1 0xa0000
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
dt: 445 probes
umodem0 at uhub0 port 4 configuration 1 interface 1 "Lenovo H5321 gw" rev
2.00/0.00 addr 2
umodem0: data interface 2, has CM over data, has break
umodem0: status change notification available
ucom0 at umodem0
umodem1 at uhub0 port 4 configuration 1 interface 3 "Lenovo H5321 gw" rev
2.00/0.00 addr 2
umodem1: data interface 4, has CM over data, has break
umodem1: status change notification available
ucom1 at umodem1
umodem2 at uhub0 port 4 configuration 1 interface 9 "Lenovo H5321 gw" rev
2.00/0.00 addr 2
umodem2: data interface 10, has CM over data, has break
umodem2: status change notification available
ucom2 at umodem2
ugen0 at uhub0 port 4 configuration 1 "Lenovo H5321 gw" rev 2.00/0.00 addr 2
uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev
2.00/0.00 addr 2
ugen1 at uhub3 port 1 "Lenovo Integrated Smart Card Reader" rev 2.00/1.00 addr 3
uhidev0 at uhub3 port 2 configuration 1 interface 0 "Logitech USB Receiver" rev
2.00/12.01 addr 4
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
uhidev1 at uhub3 port 2 configuration 1 interface 1 "Logitech USB Receiver" rev
2.00/12.01 addr 4
uhidev1: iclass 3/1, 8 report ids
ums0 at uhidev1 reportid 2: 16 buttons, Z and W dir
wsmouse2 at ums0 mux 0
uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 8: input=1, output=0, feature=0
uhidev2 at uhub3 port 2 configuration 1 interface 2 "Logitech USB Receiver" rev
2.00/12.01 addr 4
uhidev2: iclass 3/0, 33 report ids
uhidpp0 at uhidev2 reportid 16 device 1 keyboard "K400" serial 3a-2d-18-5e
uhid3 at uhidev2 reportid 32: input=14, output=14, feature=0
uhid4 at uhidev2 reportid 33: input=31, output=31, feature=0
uvideo0 at uhub3 port 6 configuration 1 interface 0 "Chicony Electronics Co.,
Ltd. Integrated Camera" rev 2.00/5.64 addr 5
video0 at uvideo0
uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev
2.00/0.00 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (7a2ec63fbc88653a.a) swap on sd0b dump on sd0b
inteldrm0: 1366x768, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
