Thanks for testing! On Sun, Oct 24, 2010 at 10:48:01PM -0700, Cherry Withers wrote: > 1) I figured out why it was stuck on the lid switch portion of the > test. It needed me to close the screen and I figured out that I needed > to put the screen in ebook format to do the ebook switch.
That's expected. (I use a magnet and wave it at the microphone then the camera. The magnet has to have poles aligned left and right, in the correct polarity. Alternatively you can do as you did, which is required in manufacturing tests, and move the laptop around yourself. This is the more correct way to do it, since it is also the worst configuration for cooling.) > 2) I am testing with two XO 1.5s. One passes the heat spreader test, > the other doesn't. What in the world is a heat spreader test? It tests the heat spreader. http://en.wikipedia.org/wiki/Heat_spreader If you choose to run technical tests, you should not be surprised at being given more data than you can handle. ;-) > Error message on failing XO: > > "...temperature rose 11 degrees C - FAIL > Selftest failed. Return code = -1" If this is a prototype preproduction laptop, then the failure is expected. Give me the serial number and I can check. If it is a production laptop, then this failure means that the heat spreader is not fully in contact with the processor. If you would like to investigate that, consider missing screws on the heat spreader anchor points, or bending damage. > " > Testing int:0 > SD card is locked > Selftest failed. Return code =-1 > ... Press any key to proceed ... > " This is a known problem with a preproduction prototype model. Give me the serial number and I can check. See http://dev.laptop.org/ticket/9914 and http://dev.laptop.org/ticket/10006 Given that you have this problem and the heat spreader test failure, it is probably a B2 model you are using. Give me the serial number and I can check. > I have a 10.1.2 build on my 1.5. I was trying the instructions for the > hardware self-test on the following page: > http://wiki.laptop.org/go/XO_Self_Test By the way, these instructions are for the XO-1, not for the XO-1.5. If you would like to update them for the XO-1, please do. I've marked the page dated. -- James Cameron http://quozl.linux.org.au/ _______________________________________________ Testing mailing list [email protected] http://lists.laptop.org/listinfo/testing
