+++ marco corvi [2010-04-14 13:14 +0200]: > On Wed, 2010-04-14 at 12:22 +0100, Wookey wrote: > > +++ marco corvi [2010-04-14 09:18 +0200]:
> > > the work on "my distox programs" is going on. > > > you can get the programs and dome docs on the page > > > http://marcocorvi.altervista.org/caving/distox/index.htm > > > > OK. good stuff. I will download, build and test tonight if I can. > > > > > > OK. What's the deal with the calibration algorithm? Having that remain > > secret is going to be a problem. I thought the device could do its > > own calibration, but apparently it needs an external app? Perhaps we > > can adapt the SAP calibration code (which is Free) as it must be very > > similar. > > as far as i read, beat algo is better. > beat should have a paper published soon in CREG > describing the algo. > i believe that when it is published i can put > my reimplementation in the sources. Hi marco - has anything happenned on this? I was waiting for the calibration algorithm to make it into the sources before packaging it, although we are about to have a problem because QT3 is being dropped from distros so a QT4 port will be necessary as wel before it'll be accepted upstream, I suspect. I'm guessing you haven't done any work on this, but if could at least put the calibration code in then we'd have the full codebase to work on. Did you see Aaron curtis was looking at a reimplmentation for android?: http://ukcaving.com/board/index.php?topic=11998.0 (which is what prompted me to poke you again) Wookey -- Principal hats: Linaro, Emdebian, Wookware, Balloonboard, ARM http://wookware.org/
