Maybe the most simple way could be in layout: symbol-hide group all symbol-show line wall
Martin S. > 20. 1. 2019 v 14:41, Andrey via Therion <therion@speleo.sk>: > > Thank you very much for catching that! Now model looks perfect! > > This "invalid scrap outline" warning was ringing some bells but I was too > impatient when tidying up the scrap. > > > It would be a great enhancement if there will be an option for walls to cut > the spaly triangles in case if splays are not stiking through the wall lines. > > <image.png> > > > <image.png> > > Воскресенье, 20 января 2019, 12:59 UTC от Martin Sluka via Therion > <therion@speleo.sk>: > > Only one very-very small dummy wall line there, check attached screen-shot. > It will be all OK when you delete it. > > Martin > > <Snímek obrazovky 2019-01-20 v 13.55.33.png> > > >> 19. 1. 2019 v 20:30, Andrey via Therion <therion@speleo.sk >> <x-msg://e.mail.ru/compose/?mailto=mailto%3ather...@speleo.sk>>: >> >> Hello Therion users, >> >> I am trying to make a 3D model for a small horizontal cave where only plan >> had been drawn up. >> >> In case if I use splays for model generation it cuts through the wall >> surfaces and looks not very nice. >> If I use just walls with option "export model -wall-source maps" and bunch >> of "point dimensions" model comes out without floor and cealing. >> >> Maybe someone can point out what am I doing wrong? >> >> Project files attached. >> >> >> Thanks, >> Andrey >> >> >> >> Вторник, 21 марта 2017, 5:53 UTC от Bruce Mutton via Therion >> <therion@speleo.sk >> <x-msg://e.mail.ru/compose/?mailto=mailto%3ather...@speleo.sk>>: >> >> I had put my understandings (about ‘point dimensions’ and ‘point >> passage-height’) in the wiki >> >> https://therion.speleo.sk/wiki/drawingchecklist#points >> <https://therion.speleo.sk/wiki/drawingchecklist#points> >> under the heading Passage Size, Fills and Speleothems >> >> and discussed an anomaly. Any corrections or comments welcome. >> >> >> Bruce >> >> >> >> -----Original Message----- >> From: Therion [mailto:therion-boun...@speleo.sk >> <x-msg://e.mail.ru/compose/?mailto=mailto%3atherion%2dboun...@speleo.sk>] On >> Behalf Of Martin Sluka via Therion >> Sent: Tuesday, 21 March 2017 10:23 AM >> To: List for Therion users <therion@speleo.sk >> <x-msg://e.mail.ru/compose/?mailto=mailto%3ather...@speleo.sk>> >> Cc: Martin Sluka <martinsl...@mac.com >> <x-msg://e.mail.ru/compose/?mailto=mailto%3amartinsl...@mac.com>> >> Subject: Re: [Therion] Troubles with the 3D generation >> >> >> >> > 20. 3. 2017 v 20:48, Benedikt Hallinger via Therion <therion@speleo.sk <>>: >> >> > >> >> > What is the different between "point dimensions" and "point >> > passage-height"? >> >> > >> >> > If i understand the therion book correctly: >> >> > - dimensions is ONLY for the 3D-tube generation and invisible in rendered >> > maps >> >> > - otherwise behaves as if "point passage-height [+<up> -<down>] would have >> > been given. >> >> > >> >> >> ...<clipped>... >> >> >> A bit difficult to understand. I understand passage-height [+8 -3] From >> water level to ceiling 8 m, depth of water 3 m. >> >> But what it means: "-<number> (the depth of the floor" or "[+<number> >> -<number>] (the distance to ceiling and distance to floor)"? Has floor any >> depth? Or it means the situation if the point „height“ is on edge of step or >> pit? >> >> m.s. >> >> >> _______________________________________________ >> Therion mailing list >> Therion@speleo.sk >> <x-msg://e.mail.ru/compose/?mailto=mailto%3ather...@speleo.sk> >> https://mailman.speleo.sk/listinfo/therion >> <https://mailman.speleo.sk/listinfo/therion> >> >> >> -- >> Kind regards, >> Andrey >> <Survey_01.zip>_______________________________________________ >> Therion mailing list >> Therion@speleo.sk >> <x-msg://e.mail.ru/compose/?mailto=mailto%3ather...@speleo.sk> >> https://mailman.speleo.sk/listinfo/therion >> <https://mailman.speleo.sk/listinfo/therion> > _______________________________________________ > Therion mailing list > Therion@speleo.sk <mailto:Therion@speleo.sk> > https://mailman.speleo.sk/listinfo/therion > <https://mailman.speleo.sk/listinfo/therion> > > > -- > Kind regards, > Andrey > _______________________________________________ > Therion mailing list > Therion@speleo.sk <mailto:Therion@speleo.sk> > https://mailman.speleo.sk/listinfo/therion > <https://mailman.speleo.sk/listinfo/therion>
_______________________________________________ Therion mailing list Therion@speleo.sk https://mailman.speleo.sk/listinfo/therion