Nor Survex, nor Therion support theodolite, as I know. Isn’t better to input such measurements as fix points?
Martin Odesláno z iPhonu 14. 12. 2020 v 19:09, Stacho Mudrak <li...@group-s.sk>: > Hello, > > could you please try the latest commit? I do not think that even a warning > for 270 (=-90) to 360 (=level) degrees clino is necessary. An error can occur > if you manually type a comma in the wrong place, but the same may happen with > compass & tape and there is no warning. > > S. > >> On Mon, 14 Dec 2020 at 09:43, Andrew Atkinson <and...@wotcc.org.uk> wrote: >> We have now used 3 different 'Total stations' all by different manufacturers >> >> All seem to give a choice between >> >> 270 as down 0 as level and 90 as up >> >> or >> >> 0 as down 90 as level and 180 as up >> >> None of them have given the choice for negative clino (all the machines >> we have use are old, but digital. >> >> So it does seem normal for theodolites! >> >> With hindsight I should have chosen the latter,then I could have just >> calibrated with a calibrate clino 90 >> >> But it was difficult to get your head round, plus I was using pockettopo >> (and sexytopo) to draw the survey in the cave, so it was easier to use >> the 270 as down version >> >> It would be really useful to be able in a centreline-endcentreline nest >> to be able to suppress the out of range error and use the 270 to 360 >> readings, but still have the error/warning for the more normal surveys >> >> thanks >> >> Andrew >> >> On 14/12/2020 08:24, Martin Sluka via Therion wrote: >> > Are you sure those data are “normal”? >> > >> > Martin >> > >> > Odesláno z iPhonu >> > >> > 14. 12. 2020 v 1:10, alastair gott <alastairg...@hotmail.com>: >> > >> >> Hi Andrew, if you can get deg,mins,secs to work in survex then you can >> >> use the .3d file with the surveys use command. (But I think from your >> >> careful wording, you already know this). >> >> >> >> import use.3d -surveys use >> >> >> >> Not ideal afaik for “mixing local and global coordinates” so tricky if >> >> your going for a kml output if you have to use with mixed .3d and normal >> >> .th files. >> >> >> >> It would be good if you could select a lookup file for the Clino, then >> >> you could easily create a translation file in excel and save that as a >> >> .th for your total station .th file to lookup to. But no idea if this is >> >> feasible or even an idea at all. >> >> >> >> Al. >> >> >> >> Sent from my iPhone >> >> >> >>> On 13 Dec 2020, at 18:15, Andrew Atkinson <and...@wotcc.org.uk> wrote: >> >>> >> >>> Hello >> >>> >> >>> I thought that there was a way I could stop the out of range error, but >> >>> I cannot now find it. It would be an a useful command to have as instead >> >>> of negative readings we got readings between 270 and 359, which although >> >>> strange is valid. In survex readings over 90 are just a warning, which >> >>> seems far more sensible, the problem is that I don't think that I can >> >>> enter the data in survex either without conversion as I don't think that >> >>> degrees minutes and seconds can be entered. >> >>> >> >>> So I'm stuck with data that I have to convert, for different reasons >> >>> depending on whether I use survex of therion. >> >>> >> >>> Here is part of the file, I have quiet a few >> >>> >> >>> survey >> >>> >> >>> centreline >> >>> data normal from to clino compass tape ignoreall >> >>> 1 2 1:08:25 83:37:40 17.88 >> >>> 2 3 00:00:00 -:-:- 0.055 >> >>> 3 - 02:39:00 266:49:00 3.206 >> >>> 3 - 314:28:20 299:57:45 2.02 >> >>> 3 - 16:32:25 312:13:20 1.246 >> >>> 3 - 06:22:35 84:16:10 1.17 >> >>> 3 - 309:16:45 84:15:50 1.846 >> >>> 3 - 55:00:10 122:44:50 0.77 >> >>> 3 - 325:02:55 249:55:45 1.014 >> >>> 3 5 359:30:50 338:07:25 16.674 >> >>> 5 - 306:52:00 262:23:20 1.402 >> >>> 5 - 59:29:30 343:51:30 1.076 >> >>> 5 - 305:08:25 358:34:30 1.274 >> >>> 5 - 315:26:20 90:51:35 1.632 >> >>> 5 - 29:12:45 77:01:35 1.891 >> >>> 5 - 19:55:50 33:02:00 3.071 >> >>> 5 - 348:22:35 31:08:25 3.707 >> >>> 5 - 350:35:20 15:31:25 4.292 >> >>> 5 - 13:29:35 15:31:20 4.202 >> >>> 5 - 12:24:50 30:20:20 7.919 >> >>> 5 6 17:29:05 31:28:50 6.444 >> >>> 6 - 307:24:35 149:47:35 1.738 >> >>> 6 - 344:44:40 149:45:30 1.426 >> >>> 6 - 77:05:35 149:36:05 1.523 >> >>> 6 - 306:05:00 314:12:10 0.84 >> >>> 6 - 353:47:50 94:54:35 2.091 >> >>> 6 - 00:42:00 219:31:40 5.446 >> >>> 6 - 18:33:50 230:03:05 4.468 >> >>> 6 7 12:26:05 241:13:00 4.272 >> >>> >> >>> .....etc >> >>> >> >>> Anyone got a solution that does not mean I have to convert in a >> >>> spreadsheet? >> >>> >> >>> thanks >> >>> >> >>> Andrew >> >>> _______________________________________________ >> >>> Therion mailing list >> >>> Therion@speleo.sk >> >>> https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fmailman.speleo.sk%2Flistinfo%2Ftherion&data=04%7C01%7C%7Cccbda31a118a4d7920f708d89f9316f5%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637434801373846851%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=C3FiInOMQihrMsvJa7aW1p%2FMHe83Q%2BZSDsw1NVslcA8%3D&reserved=0 >> >> _______________________________________________ >> >> Therion mailing list >> >> Therion@speleo.sk >> >> https://mailman.speleo.sk/listinfo/therion >> > _______________________________________________ >> > Therion mailing list >> > Therion@speleo.sk >> > https://mailman.speleo.sk/listinfo/therion >> > >> _______________________________________________ >> Therion mailing list >> Therion@speleo.sk >> https://mailman.speleo.sk/listinfo/therion > _______________________________________________ > Therion mailing list > Therion@speleo.sk > https://mailman.speleo.sk/listinfo/therion
_______________________________________________ Therion mailing list Therion@speleo.sk https://mailman.speleo.sk/listinfo/therion
