Hi Bill Does your previous project still compile and create an offset map?
In your thconfig you should make sure you have some things: * maps on # [on] off ## Setting maps to off disables all previews and offsets, and only scraps from the selected maps are output. Survey centrelines included as part of a map are not output. * maps-offset on # [on] off ## Setting maps-offset to off disables all offsets. Maps-offset has no meaning or effect if maps off is also chosen. * select MainPlan #otherwise the offsets defined in MainPlan will not be exported I’m also not sure what the effect of: A-Survey@CaveSpringCave [0 0 ft] below will be. Zero offsets are not something I remember trying, but it is probably better not to do this while you are trying to debug your project. Regards Bruce -----Original Message----- From: Therion <[email protected]> On Behalf Of Bill Gee Sent: Tuesday, 12 November 2024 11:40 To: Therion Mail List <[email protected]> Subject: [Therion] Cannot get offset maps to work Hello everyone - Most of my recent questions to this list have generated exactly /dev/null for response. I hope this one gets something. I am trying to build a map where one section of underlying passage is drawn offset from the main map. I have done this before and it worked. This time therion is completely ignoring the offset parameters. What am I doing wrong? The portion that I want to offset does get drawn, and it is drawn below as I specified. It just does not get drawn offset. I tried taking the offset out of the list. Therion complained about that. I tried offsetting the other two partial maps, and that does not work. The last time I compiled a map with an offset, I was using therion 6.1.8 on Fedora 38. Now I have 6.2.1+dev on Fedora 41. Did something change between those two versions that affects how this feature works? I attached the .th file to this message. Thanks! -- =============== Bill Gee
_______________________________________________ Therion mailing list [email protected] https://mailman.speleo.sk/listinfo/therion
