paul swed wrote:
They are indeed cheap and it would be handy to have low noise divider
chains.
6 decades worth. 74ls90s get really boring to wire.
Unfortunately I am unfamiliar with using the device. But I do seem them
used.
On Wed, Feb 3, 2010 at 1:59 PM, Matt Ettus <boysc...@gmail.com> wrote:
Does anyone have any experience using CPLDs for very low phase noise
dividers? You can get an XC9536XL from Xilinx for around $1, and I
thought it would make a good divide by 2 through 10 device.
Matt
I have done that with a Virtex4-SX on a ML402 board for fun and because a customer
insisted on it.
It was a desaster on the spectrum analyzer.
It will probably work if you resynchronize the CPLD output with a 74LVC1G74 to the original clock.
regards, Gerhard
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
