Maybe Diet Coke or Coke Zero ?? -John
========== [snip} > Legend has it you can solder stainless steel with Coca Cola, but the > sugar and caramel make that unlikely. > A compounding pharmacy may be able to sell you some. > I hope that that helps, > Cheers, Neville Michie > > > > > On 22/03/2010, at 7:43 AM, paul swed wrote: > >> Were do you obtain a small amount of phosphoric acid???? >> Also when I looked it up they said it was H3PO4. Doesn't sound like >> the >> same. >> Is there a common use for it? >> >> On Sun, Mar 21, 2010 at 1:58 PM, randy hunt >> <randy_hunt...@yahoo.com> wrote: >> >>> Try measuring a known length of the resistance wire, say 6 inches >>> and then >>> double. . . >>> >>> Randy >>> >>> Hi >>> >>> Next step would be to figure out what a reasonable ohms / foot number >>> is. >>> >>> Bob >>> >>> >>> On Mar 21, 2010, at 12:41 AM, Chuck Harris >>> wrote: >>> >>>> HP just wound two parallel wires around the cylinder. They >>> did not >>>> twist. The wires at the entrance end of the solenoid went to >>> the >>>> electronics, the wires at the exit end of the solenoid were >>> shorted >>>> together... I think they used a crimp for the short. >>>> >>> >>>> -Chuck Harris >>>> >>>> J. L. Trantham wrote: >>>>> Do you >>> make a 'twisted pair' and then wind that or just wind two parallel >>>>> >>> wires around the cylinder? >>>>> Joe >>>> >>>> >>> _______________________________________________ >>>> time-nuts mailing list >>> -- time-nuts@febo.com >>>> To >>> unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/ >>> time-nuts >>>> >>> and follow the instructions there. >>>> >>> >>> >>> >>> _______________________________________________ >>> time-nuts mailing >>> list -- time-nuts@febo.com >>> To >>> unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/ >>> time-nuts >>> and >>> follow the instructions there. >>> _______________________________________________ >>> time-nuts mailing list -- time-nuts@febo.com >>> To unsubscribe, go to >>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >>> and follow the instructions there. >>> >> _______________________________________________ >> time-nuts mailing list -- time-nuts@febo.com >> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/ >> time-nuts >> and follow the instructions there. > > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
