Michael, Thanks for the hint. I've looked at that site a thousand times but never found that hint until now. I'll give it a try.
Thanks again. Joe -----Original Message----- From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com] On Behalf Of cook michael Sent: Tuesday, January 18, 2011 2:20 AM To: time-nuts@febo.com Subject: Re: [time-nuts] LH v3.0 Beta and Z3816A Question Le 18/01/2011 05:07, J. L. Trantham a écrit : > An unrelated question. My Z3816A reports GPS time. I have looked but > have not found a command to make it switch to UTC. Does such a > command exist? If so, what is it? > The command to do the same on the Z3801A might work with this box aswell. Using info from K8CU; http://www.realhamradio.com/GPS_Frequency_Standard.htm Issue the command: :diag:gps:utc? If it returns 0 you are in GPS mode; if 1 you are in UTC Use the command: :diag:gps:utc 1 followed by :syst:pon to set it to UTC mode. Some units have to be powered off to actually reset to UTC depending on software version. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.