tnx On Tue, Jan 18, 2011 at 5:49 PM, John Miles <jmi...@pop.net> wrote:
> No, not at this time. It would take a lot of hacking. > > -- john, KE5FX > > > -----Original Message----- > > From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com]On > > Behalf Of paul swed > > Sent: Tuesday, January 18, 2011 2:18 PM > > To: Discussion of precise time and frequency measurement > > Subject: Re: [time-nuts] LH v3.0 Beta and Z3816A Question > > > > > > A quick question > > I thought lady heather was a Tbolt program only. > > Does it work with other GPSDP like the hp 3801 etc??? > > Thanks > > > > On Tue, Jan 18, 2011 at 9:20 AM, J. L. Trantham <jlt...@att.net> wrote: > > > > > The Z3816A responded to the command nicely. I was also able to use the > > > command: > > > *tst? > > > to reboot the receiver without having to turn off the Z3816A. This was > > > using Symmetricom SatStat v5.0. I have not tried with HP SatStat v4.2. > > > > > > Initially, the time was off by what appeared to be the leap second > value > > > with a TFOM of 6. Now it is back to a TFOM of 3 and the time appears > > > correct. > > > > > > Thanks, > > > > > > Joe > > > > > > -----Original Message----- > > > From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com]On > > > Behalf Of J. L. Trantham > > > Sent: Tuesday, January 18, 2011 6:36 AM > > > To: 'Discussion of precise time and frequency measurement' > > > Subject: Re: [time-nuts] LH v3.0 Beta and Z3816A Question > > > > > > > > > Michael, > > > > > > Thanks for the hint. I've looked at that site a thousand times > > but never > > > found that hint until now. I'll give it a try. > > > > > > Thanks again. > > > > > > Joe > > > > > > -----Original Message----- > > > From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com] > On > > > Behalf Of cook michael > > > Sent: Tuesday, January 18, 2011 2:20 AM > > > To: time-nuts@febo.com > > > Subject: Re: [time-nuts] LH v3.0 Beta and Z3816A Question > > > > > > > > > Le 18/01/2011 05:07, J. L. Trantham a écrit : > > > > An unrelated question. My Z3816A reports GPS time. I have looked > but > > > > have not found a command to make it switch to UTC. Does such a > > > > command exist? If so, what is it? > > > > > > > The command to do the same on the Z3801A might work with this > > box aswell. > > > > > > Using info from K8CU; > > > http://www.realhamradio.com/GPS_Frequency_Standard.htm > > > > > > Issue the command: > > > > > > :diag:gps:utc? > > > > > > If it returns 0 you are in GPS mode; if 1 you are in UTC > > > > > > Use the command: > > > > > > :diag:gps:utc 1 > > > > > > followed by > > > > > > :syst:pon > > > > > > to set it to UTC mode. Some units have to be powered off to > > actually reset > > > to UTC depending on software version. > > > > > > > > > > > > > > > _______________________________________________ > > > time-nuts mailing list -- time-nuts@febo.com > > > To unsubscribe, go to > > > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > > > and follow the instructions there. > > > > > > > > > _______________________________________________ > > > time-nuts mailing list -- time-nuts@febo.com > > > To unsubscribe, go to > > > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > > > and follow the instructions there. > > > No virus found in this incoming message. > > > Checked by AVG - www.avg.com > > > Version: 9.0.872 / Virus Database: 271.1.1/3386 - Release Date: > 01/17/11 > > > 01:34:00 > > > > > > > > > _______________________________________________ > > > time-nuts mailing list -- time-nuts@febo.com > > > To unsubscribe, go to > > > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > > > and follow the instructions there. > > > > > _______________________________________________ > > time-nuts mailing list -- time-nuts@febo.com > > To unsubscribe, go to > > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > > and follow the instructions there. > > > > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.