Are you running the v3 beta? I normally run the program 24/7 on a 300 MHz laptop here, acting as both a server for two Thunderbolts and a client. There were some improvements to CPU utilization in the current beta, and its UI response should be essentially instantaneous.
-- john > -----Original Message----- > From: time-nuts-boun...@febo.com [mailto:time-nuts- > boun...@febo.com] On Behalf Of Achim Vollhardt > Sent: Wednesday, February 22, 2012 2:26 PM > To: time-nuts@febo.com > Subject: [time-nuts] Lady Heather on low power CPU/Linux? > > Fellow Time-Nuts, > I am trying to run LH on an Alix 3D3 single-board PC: > > http://www.pcengines.ch/alix3d3.htm > > Being only a 500 MHz Geode CPU, there is not much power to work with. > Still, running Debian Linux with Wine allowed me to make LH work.. > > BUT: A single second tick takes about 3-4 seconds to show up.. needless > to say that LH never catches up again and user interaction is painful at > best. > > I tried the /tw=50 setting for less CPU usage with little effect. Is > there anything else I can do? > > Strictly speaking, I would only need the active temperature control, I > could spare all the other features.. > > Any comments out there? > > Regards, > Achim > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi- > bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.