On Wed, 22 Feb 2012 23:26:09 +0100, Achim Vollhardt wrote: > Fellow Time-Nuts, > I am trying to run LH on an Alix 3D3 single-board PC: > > http://www.pcengines.ch/alix3d3.htm > > Being only a 500 MHz Geode CPU, there is not much power to work with. > Still, running Debian Linux with Wine allowed me to make LH work.. > > BUT: A single second tick takes about 3-4 seconds to show up.. needless > to say that LH never catches up again and user interaction is painful at > best. > > I tried the /tw=50 setting for less CPU usage with little effect. Is > there anything else I can do?
I have been running LH-3.0 Beta on a Via-Epia 5000 http://www.newegg.com/Product/Product.aspx?Item=N82E16813181025 It's a 533Mhz Via EDEN CPU with 512+128 Mb Ram , running Ubuntu 10.04LTS I was using /vs /gb /TW=25 It was running ok on that machine. I have later invested in a "4 channel Serial to Ethernet" converter , and am now running 2 LH's from a 1.8Mhz VIA with Ubuntu 8.04 (my mail server) These parms are appended at the end of the LH command line : /ip=aa.bb.cc.dd:4001/ /vs /gb /TW The :4001 is the TCP port for serialport 1 on my converter. This setup makes me able to connect LH from any machine to a TB. But only one active connection is allowed at a time. So in practice i'm running the 2 x LH against the TB's on the mail-server. And "VNC to the mailserver" if i want to see the LH's. But there were no problems using the old VIA-EPIA 5000 , i just have my mailserver on 24/7 , and didn't need the EPIA to be on when i got the Serial-to-Ether converter. CFO _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.