For the life of me I can't find the link to the schematic or any mention of it in the archives. Google fail. However, I was able to find some screen shots and pictures from the Chebyshev filter that I built from the docs that I originally found here. This should get you started if you want to roll your own. Mini-Circuits makes a filter if memory serves, but this is a very cheap and fun project if you already have a little project box. Screen shots show simulation and most importantly, the values of the parts in the project. The 0.06uH inductor was hand wound and tweaked till I got it right. S parameters were measured with the cover ON and the cover does de-tune the circuit so you have to compensate before buttoning it up.
https://goo.gl/photos/UiqRrFRNYczvcbNh6 -Bob N3XKB On Thu, Jul 16, 2015 at 11:49 AM, skipp Isaham via time-nuts < time-nuts@febo.com> wrote: > re: 10MHz Square to Sine Wave Conversion > > The GPSDO I recently acquired outputs a 10 MHz square wave. I'd like > to convert it to a sine wave and I am looking for suggestions and info re > any reasonable pre-made circuits and/or boards. No sense reinventing the > wheel if I can avoid it. > > Otherwise I will start from scratch and make a new wheel.... > > Thank you in advance for your replies. > > Regards, > > skipp > > skipp025 at yahoo dot com > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.