If you are interested in purchasing you can do so directly through our ebay listing here: http://www.ebay.com/itm/-/181896123655
But, please contact me if you have any questions. Thanks, Keith Keith On Wed, Oct 7, 2015 at 7:14 AM, Keith Loiselle <keith.loise...@gmail.com> wrote: > Hello everyone, > > > > Since there are many Fury GPSDO users here and many other users of the > Motorola M12+ and M12M timing receivers, we wanted to introduce our new > product which is an M12M compatible timing and navigation receiver that > uses the latest uBlox M8T GNSS receiver, and is a one-to-one replacement > for the aging, and hard to use Motorola/iLotus GPS receiver. > > > > This is kind of like a super M12M, with significant improvements in the > 1PPS timing accuracy and stability, support for receiving two of any of the > standard GNSS systems at any one time (GPS with SBAS, Glonass, QZSS, > BeiDou, and soon Galileo), and true plug-and-play operation. It should work > in pretty much most Motorola M12+ and M12M binary command applications. > > > > The unit is a form-fit-function compatible replacement for the M12M/M12+ > receivers, and has been qualified on the JLT Fury GPSDO as well as the > Microsemi/Symmetricom XLI, and provides a massive upgrade in GNSS > performance such as -167dBm tracking capability (think indoors reception > may now be possible under certain circumstances), 72 channels capability > for very fast cold-start and re-acquisition, and multi-GNSS support. > > > > It has some additional features such as: > > * Two USB ports, one for easy SCPI control, one for full access to the > uBlox commands for setup, as well as Carrier Phase, Almanac, and Ephemeris > data. The unit can also be powered via the USB ports and used stand-alone > sitting on a desk etc. There is no setup required though out-of-the-box, > all setup is optional > > * 7-Segment LED status display and 5 additional status LEDs show GNSS > status, fix status, signal strength, UTC time, and number of sats tracked > > * DIP switch for easy configuration of which GNSS systems should be > enabled, Position Hold mode versus 3D Mobile mode, etc (these settings can > be over-written by USB commands) > > * 1Hz to 10MHz+ buffered Synthesized (NCO) output that is > frequency-locked to the GNSS system, and can be easily configured through > the USB ports > > * Position Hold mode with Auto Survey, or full 3D mobile mode (selectable > via USB, Motorola binary command, or via the DIP switch), supporting full > Auto Kalman setup depending on vehicle dynamics (including auto-selection > of Carrier Phase versus Doppler tracking etc) > > You can find out more in the User Manual and Spec Sheet available here: > > > http://www.jackson-labs.com/assets/uploads/main/M12M_replacement_UserManual.pdf > > > and > > > > http://www.jackson-labs.com/assets/uploads/main/M12M_replacement_Specsheet.pdf > > We are making this unit available to Time Nuts users for a special pricing > of $185 per unit plus shipping. Pricing will revert to the list price of > $220 at the end of this month. We are asking for anyone using the M12+ or > M12M receivers in other than the Fury or XLI GPSDOs to help us test > compatibility with those systems, and hope to have as many different > products as possible tested out with your help. > > > > Please contact me OFFLINE(!) if you are interested in this unit. > > Thanks, > Keith > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
