Tom, The JLT M12M replacement receiver should work in the Commsync II. If you find any issues we would work to fix them a firmware update.
Keith Keith On Wed, Oct 7, 2015 at 8:46 PM, Tom Knox <act...@hotmail.com> wrote: > In my humble opinion Jackson Labs continues to raise the bar in GPS time > and frequency with products that are compact, reasonably price, and most of > all offer exceptional performance. Any idea if these will plug and play in > my FEI/Zyfer Commsync II"s > Thanks All > Thomas Knox > > > > > Date: Wed, 7 Oct 2015 14:44:03 -0700 > > From: keith.loise...@gmail.com > > To: time-nuts@febo.com > > Subject: Re: [time-nuts] Jackson Labs M12M Replacement Receiver > > > > If you are interested in purchasing you can do so directly through our > ebay > > listing here: > > http://www.ebay.com/itm/-/181896123655 > > > > But, please contact me if you have any questions. > > > > Thanks, > > Keith > > > > > > > > Keith > > > > On Wed, Oct 7, 2015 at 7:14 AM, Keith Loiselle <keith.loise...@gmail.com > > > > wrote: > > > > > Hello everyone, > > > > > > > > > > > > Since there are many Fury GPSDO users here and many other users of the > > > Motorola M12+ and M12M timing receivers, we wanted to introduce our new > > > product which is an M12M compatible timing and navigation receiver that > > > uses the latest uBlox M8T GNSS receiver, and is a one-to-one > replacement > > > for the aging, and hard to use Motorola/iLotus GPS receiver. > > > > > > > > > > > > This is kind of like a super M12M, with significant improvements in the > > > 1PPS timing accuracy and stability, support for receiving two of any > of the > > > standard GNSS systems at any one time (GPS with SBAS, Glonass, QZSS, > > > BeiDou, and soon Galileo), and true plug-and-play operation. It should > work > > > in pretty much most Motorola M12+ and M12M binary command applications. > > > > > > > > > > > > The unit is a form-fit-function compatible replacement for the > M12M/M12+ > > > receivers, and has been qualified on the JLT Fury GPSDO as well as the > > > Microsemi/Symmetricom XLI, and provides a massive upgrade in GNSS > > > performance such as -167dBm tracking capability (think indoors > reception > > > may now be possible under certain circumstances), 72 channels > capability > > > for very fast cold-start and re-acquisition, and multi-GNSS support. > > > > > > > > > > > > It has some additional features such as: > > > > > > * Two USB ports, one for easy SCPI control, one for full access to > the > > > uBlox commands for setup, as well as Carrier Phase, Almanac, and > Ephemeris > > > data. The unit can also be powered via the USB ports and used > stand-alone > > > sitting on a desk etc. There is no setup required though > out-of-the-box, > > > all setup is optional > > > > > > * 7-Segment LED status display and 5 additional status LEDs show GNSS > > > status, fix status, signal strength, UTC time, and number of sats > tracked > > > > > > * DIP switch for easy configuration of which GNSS systems should be > > > enabled, Position Hold mode versus 3D Mobile mode, etc (these settings > can > > > be over-written by USB commands) > > > > > > * 1Hz to 10MHz+ buffered Synthesized (NCO) output that is > > > frequency-locked to the GNSS system, and can be easily configured > through > > > the USB ports > > > > > > * Position Hold mode with Auto Survey, or full 3D mobile mode > (selectable > > > via USB, Motorola binary command, or via the DIP switch), supporting > full > > > Auto Kalman setup depending on vehicle dynamics (including > auto-selection > > > of Carrier Phase versus Doppler tracking etc) > > > > > > You can find out more in the User Manual and Spec Sheet available here: > > > > > > > > > > http://www.jackson-labs.com/assets/uploads/main/M12M_replacement_UserManual.pdf > > > > > > > > > and > > > > > > > > > > > > > http://www.jackson-labs.com/assets/uploads/main/M12M_replacement_Specsheet.pdf > > > > > > We are making this unit available to Time Nuts users for a special > pricing > > > of $185 per unit plus shipping. Pricing will revert to the list price > of > > > $220 at the end of this month. We are asking for anyone using the M12+ > or > > > M12M receivers in other than the Fury or XLI GPSDOs to help us test > > > compatibility with those systems, and hope to have as many different > > > products as possible tested out with your help. > > > > > > > > > > > > Please contact me OFFLINE(!) if you are interested in this unit. > > > > > > Thanks, > > > Keith > > > > > _______________________________________________ > > time-nuts mailing list -- time-nuts@febo.com > > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > > and follow the instructions there. > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.