Hello everyone, The M12 Replacement Receivers have been in your hands for a few weeks. We appreciate the feedback we have received off list from a few. Let us know if you have had any problems or concerns as well as positive results that you can share.
Thanks, Keith Keith On Mon, Oct 12, 2015 at 9:25 AM, Keith Loiselle <keith.loise...@gmail.com> wrote: > Tom, > > The JLT M12M replacement receiver should work in the Commsync II. If you > find any issues we would work to fix them a firmware update. > > Keith > > > Keith > > On Wed, Oct 7, 2015 at 8:46 PM, Tom Knox <act...@hotmail.com> wrote: > >> In my humble opinion Jackson Labs continues to raise the bar in GPS time >> and frequency with products that are compact, reasonably price, and most of >> all offer exceptional performance. Any idea if these will plug and play in >> my FEI/Zyfer Commsync II"s >> Thanks All >> Thomas Knox >> >> >> >> > Date: Wed, 7 Oct 2015 14:44:03 -0700 >> > From: keith.loise...@gmail.com >> > To: time-nuts@febo.com >> > Subject: Re: [time-nuts] Jackson Labs M12M Replacement Receiver >> > >> > If you are interested in purchasing you can do so directly through our >> ebay >> > listing here: >> > http://www.ebay.com/itm/-/181896123655 >> > >> > But, please contact me if you have any questions. >> > >> > Thanks, >> > Keith >> > >> > >> > >> > Keith >> > >> > On Wed, Oct 7, 2015 at 7:14 AM, Keith Loiselle < >> keith.loise...@gmail.com> >> > wrote: >> > >> > > Hello everyone, >> > > >> > > >> > > >> > > Since there are many Fury GPSDO users here and many other users of the >> > > Motorola M12+ and M12M timing receivers, we wanted to introduce our >> new >> > > product which is an M12M compatible timing and navigation receiver >> that >> > > uses the latest uBlox M8T GNSS receiver, and is a one-to-one >> replacement >> > > for the aging, and hard to use Motorola/iLotus GPS receiver. >> > > >> > > >> > > >> > > This is kind of like a super M12M, with significant improvements in >> the >> > > 1PPS timing accuracy and stability, support for receiving two of any >> of the >> > > standard GNSS systems at any one time (GPS with SBAS, Glonass, QZSS, >> > > BeiDou, and soon Galileo), and true plug-and-play operation. It >> should work >> > > in pretty much most Motorola M12+ and M12M binary command >> applications. >> > > >> > > >> > > >> > > The unit is a form-fit-function compatible replacement for the >> M12M/M12+ >> > > receivers, and has been qualified on the JLT Fury GPSDO as well as the >> > > Microsemi/Symmetricom XLI, and provides a massive upgrade in GNSS >> > > performance such as -167dBm tracking capability (think indoors >> reception >> > > may now be possible under certain circumstances), 72 channels >> capability >> > > for very fast cold-start and re-acquisition, and multi-GNSS support. >> > > >> > > >> > > >> > > It has some additional features such as: >> > > >> > > * Two USB ports, one for easy SCPI control, one for full access to >> the >> > > uBlox commands for setup, as well as Carrier Phase, Almanac, and >> Ephemeris >> > > data. The unit can also be powered via the USB ports and used >> stand-alone >> > > sitting on a desk etc. There is no setup required though >> out-of-the-box, >> > > all setup is optional >> > > >> > > * 7-Segment LED status display and 5 additional status LEDs show GNSS >> > > status, fix status, signal strength, UTC time, and number of sats >> tracked >> > > >> > > * DIP switch for easy configuration of which GNSS systems should be >> > > enabled, Position Hold mode versus 3D Mobile mode, etc (these >> settings can >> > > be over-written by USB commands) >> > > >> > > * 1Hz to 10MHz+ buffered Synthesized (NCO) output that is >> > > frequency-locked to the GNSS system, and can be easily configured >> through >> > > the USB ports >> > > >> > > * Position Hold mode with Auto Survey, or full 3D mobile mode >> (selectable >> > > via USB, Motorola binary command, or via the DIP switch), supporting >> full >> > > Auto Kalman setup depending on vehicle dynamics (including >> auto-selection >> > > of Carrier Phase versus Doppler tracking etc) >> > > >> > > You can find out more in the User Manual and Spec Sheet available >> here: >> > > >> > > >> > > >> http://www.jackson-labs.com/assets/uploads/main/M12M_replacement_UserManual.pdf >> > > >> > > >> > > and >> > > >> > > >> > > >> > > >> http://www.jackson-labs.com/assets/uploads/main/M12M_replacement_Specsheet.pdf >> > > >> > > We are making this unit available to Time Nuts users for a special >> pricing >> > > of $185 per unit plus shipping. Pricing will revert to the list price >> of >> > > $220 at the end of this month. We are asking for anyone using the >> M12+ or >> > > M12M receivers in other than the Fury or XLI GPSDOs to help us test >> > > compatibility with those systems, and hope to have as many different >> > > products as possible tested out with your help. >> > > >> > > >> > > >> > > Please contact me OFFLINE(!) if you are interested in this unit. >> > > >> > > Thanks, >> > > Keith >> > > >> > _______________________________________________ >> > time-nuts mailing list -- time-nuts@febo.com >> > To unsubscribe, go to >> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> > and follow the instructions there. >> >> _______________________________________________ >> time-nuts mailing list -- time-nuts@febo.com >> To unsubscribe, go to >> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. >> > > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.