Magnus, I used to be responsible for a couple of labs in the late 90's early 2000's where we had several of these.
First - do you have this option installed: Add Agilent Instrument BASIC 1C2 ? We automated the VSA's using GPIB and TCL. I jumped through some hoops to make the TCL library publicly available on SourceForge - and it is still there. TCL is a basic like language for easy instrument control and worth looking at if you want this to be as easy as possible. I noticed there are some nifty GPIB to USB adapters available now. We ran 24/7 this way doing low noise analysis. Best Regards, John W. AJ6BC On Sat, Feb 27, 2016 at 8:06 AM, Magnus Danielson < mag...@rubidium.dyndns.org> wrote: > Fellow time-nuts, > > This is a little off the normal time-stuff, but I wonder if people just > happens to have some suitable input to give. > > I have a couple of HP89410A/89441A and would like to see if it would be > nice to see what could be done using the instrument BASIC. How would I be > able to enable or install it? > > Now, don't even bother to write comments about how you can do better using > software control from a PC with this and that tool, this is explicitly not > part of the question. > > Cheers, > Magnus > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.