John would that be the command line interpreter? There are a lot of TCLs on sourceforge Regards Paul WB8TSL
On Sat, Feb 27, 2016 at 5:01 PM, John C. Westmoreland, P.E. < j...@westmorelandengineering.com> wrote: > Magnus, > > I used to be responsible for a couple of labs in the late 90's early 2000's > where we had several of these. > > First - do you have this option installed: > Add Agilent Instrument BASIC 1C2 ? > > We automated the VSA's using GPIB and TCL. I jumped through some hoops to > make the TCL library > publicly available on SourceForge - and it is still there. TCL is a basic > like language for easy instrument > control and worth looking at if you want this to be as easy as possible. > > I noticed there are some nifty GPIB to USB adapters available now. > > We ran 24/7 this way doing low noise analysis. > > Best Regards, > John W. > AJ6BC > > > On Sat, Feb 27, 2016 at 8:06 AM, Magnus Danielson < > mag...@rubidium.dyndns.org> wrote: > > > Fellow time-nuts, > > > > This is a little off the normal time-stuff, but I wonder if people just > > happens to have some suitable input to give. > > > > I have a couple of HP89410A/89441A and would like to see if it would be > > nice to see what could be done using the instrument BASIC. How would I be > > able to enable or install it? > > > > Now, don't even bother to write comments about how you can do better > using > > software control from a PC with this and that tool, this is explicitly > not > > part of the question. > > > > Cheers, > > Magnus > > _______________________________________________ > > time-nuts mailing list -- time-nuts@febo.com > > To unsubscribe, go to > > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > > and follow the instructions there. > > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.