John,
On 02/27/2016 11:01 PM, John C. Westmoreland, P.E. wrote:
Magnus,
I used to be responsible for a couple of labs in the late 90's early 2000's
where we had several of these.
First - do you have this option installed:
Add Agilent Instrument BASIC 1C2 ?
Unfortunatly not. The trick question is if there is any chance of enable
or install it.
We automated the VSA's using GPIB and TCL. I jumped through some hoops to
make the TCL library
publicly available on SourceForge - and it is still there. TCL is a basic
like language for easy instrument
control and worth looking at if you want this to be as easy as possible.
I've worked with TCL and have tried to avoid it in this millennium.
Could be interesting to look at never the less.
I noticed there are some nifty GPIB to USB adapters available now.
We ran 24/7 this way doing low noise analysis.
Indeed. That is one of many uses.
Cheers,
Magnus
Best Regards,
John W.
AJ6BC
On Sat, Feb 27, 2016 at 8:06 AM, Magnus Danielson <
mag...@rubidium.dyndns.org> wrote:
Fellow time-nuts,
This is a little off the normal time-stuff, but I wonder if people just
happens to have some suitable input to give.
I have a couple of HP89410A/89441A and would like to see if it would be
nice to see what could be done using the instrument BASIC. How would I be
able to enable or install it?
Now, don't even bother to write comments about how you can do better using
software control from a PC with this and that tool, this is explicitly not
part of the question.
Cheers,
Magnus
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
