Hi Mark I was delighted to read about Heather's ability to talk to a timing M12. I have been having fits here trying to get the M12 to accept any command (using Perl.. a mistake it seems). i wanted to end up with a Linux capable utility and had previously used Perl to parse NEMA on my old TAC2.
I have been learning about binmode(M12) and other edge cases, but am probably still far from the eureka moment.. anyhow, i am setting up heather5 for a trial flight. thanks dave mallery On Fri, Apr 21, 2017 at 8:40 PM, Mark Sims <hol...@hotmail.com> wrote: > Earlier somebody asked if these were M12's or M12T's. I powered mine up > and connected it to Lady Heather. It appears to be an M12T. It responds > to the survey and position hold commands and outputs the sawtooth > correction value. Also the hardware ID returned is P373T12T12. > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/ > mailman/listinfo/time-nuts > and follow the instructions there. > -- Dave Mallery, K5EN (ubuntu linux 16-10) PO Box 15 Ophir, OR 97464 linux counter #64628 (since 1997) _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.