Ulf Perhaps you are reading peak VAC that is 1.414 X the RMS voltage typically called out in manuals. I would email you directly but don't seem to have your email. Everything points back to time-nuts. Regards Paul WB8TSL
On Thu, Jul 27, 2017 at 1:24 PM, Ulf Kylenfall via time-nuts < [email protected]> wrote: > Trying to repair an old 5065A. > After a lot of problems with the Rubidium cavity restoration, it was time > to startthe unit. > Lucklily, I did not have the Rubidium temperature controller PCB > mounted,but the Power supply regulator malfunctioned and blew the AC mains > fuse (0.5A). > Removing that board I discovered that the "24-32V" raw DC was some 40 > Volts. > Yes - The unit was correctly configured for 230VAC. Even withsome load, > the DC was still ~40V > Unable to find out why, I had to remove the original transformer and > replace itwith a 22V unit after which the rectified DC was back to some 32 > Volts. > (In Europe, there are seldom primarys with two windings 115/230 which > madethe search extra tedious). > The 5065 was originally wired with internal battery backup as well asa > mechanical clock. These options was removed since the batterieswere > deceased and the clock driver flip-flop unobtanium. > After PSU board repair, all supply voltages are normal, the Rubidiumcavity > warms up and the crystal oscillator and syntesizer seems to work. > Have not gotten further, just want to know what the h**k was going onwith > the transformer... > Ulf - SM6GXV > > > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/ > mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
