Poul
I looked at your site and the power supply. That makes a lot of sense.
Though I have not lost my transformer as Ulf has at least I see an answer
that I can use. I would have come up with the same approach but you did the
thinking for me.
Thanks
Paul
WB8TSL

On Thu, Jul 27, 2017 at 3:58 PM, Poul-Henning Kamp <[email protected]>
wrote:

> --------
> In message <[email protected]>, Ulf Kylenfall
> via t
> ime-nuts writes:
>
> >Removing that board I discovered that the "24-32V" raw DC was some
> >40 Volts.
>
> That's a bit on the high side, but not excessively so.
>
> HP tended to let the linear regulators shave a big slice in
> precision instruments, probably to make sure that absolutely
> no ripple makes it through.
>
> If I were you, I would ditch the transformer entirely, and go with
> an external DC PSU and put a high-quality DC/DC converter in the
> HP5065A
>
> See:
>
>         http://phk.freebsd.dk/hacks/HP5065A/20150930_dcdc/index.html
>
>
>
> --
> Poul-Henning Kamp       | UNIX since Zilog Zeus 3.20
> [email protected]         | TCP/IP since RFC 956
> FreeBSD committer       | BSD since 4.3-tahoe
> Never attribute to malice what can adequately be explained by incompetence.
> _______________________________________________
> time-nuts mailing list -- [email protected]
> To unsubscribe, go to https://www.febo.com/cgi-bin/
> mailman/listinfo/time-nuts
> and follow the instructions there.
>
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

Reply via email to