--------
In message <[email protected]>, Ulf Kylenfall via t
ime-nuts writes:

>Removing that board I discovered that the "24-32V" raw DC was some
>40 Volts.

That's a bit on the high side, but not excessively so.

HP tended to let the linear regulators shave a big slice in
precision instruments, probably to make sure that absolutely
no ripple makes it through.

If I were you, I would ditch the transformer entirely, and go with
an external DC PSU and put a high-quality DC/DC converter in the
HP5065A

See:

        http://phk.freebsd.dk/hacks/HP5065A/20150930_dcdc/index.html



-- 
Poul-Henning Kamp       | UNIX since Zilog Zeus 3.20
[email protected]         | TCP/IP since RFC 956
FreeBSD committer       | BSD since 4.3-tahoe    
Never attribute to malice what can adequately be explained by incompetence.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

Reply via email to