It surprises me how the SDR designers in 90% of the cases don't even allow for an external clock. It's like accuracy never came into thought.
On Sat, Sep 29, 2018, 8:58 PM Tom Van Baak <t...@leapsecond.com> wrote: > What's a clever, simple, reliable (pick 2 of 3) way to get 16 MHz out of > 10 MHz? Low phase noise isn't a big requirement and jitter doesn't need to > be sub-nanosecond. The main requirement is perfect cycle count accuracy. > This is for driving a 16 MHz microcontroller from a 10 MHz Rb/Cs/GPSDO. 10 > MHz input is likely sine; 16 MHz output is 3v3 or 5v CMOS. > > Thanks, > /tvb > > > _______________________________________________ > time-nuts mailing list -- time-nuts@lists.febo.com > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- time-nuts@lists.febo.com To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.