Bert,
I found them. You posted the Gerber files as file OCXO.pcb-1.zip on
5-Nov-2018 here:
http://lists.febo.com/pipermail/time-nuts_lists.febo.com/2018-November/094597.html
http://lists.febo.com/pipermail/time-nuts_lists.febo.com/2018-November/094598.html
/tvb
On 5/13/2020 5:34 AM, ew via time-nuts wrote:
A year ago I posted the two boards with Gerber File since no one was willing to
make and sell. If there is still interest I will post Gerber file again have to
look for it
Bert Kehren
In a message dated 5/13/2020 7:40:49 AM Eastern Standard Time,
notfad...@gmail.com writes:
I've been trying to find a base PCB design to use too. In the interim I
bought some boards from Gerry Sweeney that sells them for HP5313x frequency
counter OCXO upgrades and supports different footprints. Open source
design is even better. OSHpark is great. Please post it!
Bill E.
On Tue, May 12, 2020, 11:59 PM Matthias Welwarsky <time-n...@welwarsky.de>
wrote:
On Dienstag, 12. Mai 2020 20:53:25 CEST Gerhard Hoffmann wrote:
Ten boards did cost $5 at PCBway, DHL wanted $25 for transport. :-<
I can publish the Altium Designer project or the Gerber files when the
1st ten are used up
and there has been somewhat more testing. The number of possible
combinations
is quite large.
If you publish the Gerber files, People in the US can use OSHPark for
having
the boards made, in EU Aisler.net is probably the best option.
BR,
Matthias
Cheers, Gerhard
Am 12.05.20 um 19:52 schrieb Wes:
Does anyone know of a ready made board that will allow me to mount and
at the least, minimally support the operation of an MV89A oscillator.
I have one which I've powered up deadbug style and would like to clean
up the mess a little.
Thanks
Wes N7WS
_______________________________________________
time-nuts mailing list -- time-nuts@lists.febo.com
To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts@lists.febo.com
To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts@lists.febo.com
To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts@lists.febo.com
To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts@lists.febo.com
To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.
