You give away your age, was there did a lot of it and off to the repro shop and than the board manufacturer. All local in Houston. Bert Kehren In a message dated 5/13/2020 10:39:48 AM Eastern Standard Time, w...@triconet.org writes:
Thank you to all who have written, on and off list, with offers of boards and advice on how to make my own. Much appreciated. I think I'm on to one that meets my fairly simple needs and uses through-hole components. I have done SMT construction in the past but things have shrunk in size by an order of magnitude since then it seems. (I can remember laying out boards by hand, taping up the artwork 4:1, reducing it photographically, exposing and etching boards. So today's technology is magical.) Many of you are doing some awesome work. Well done. Wes N7WS _______________________________________________ time-nuts mailing list -- time-nuts@lists.febo.com To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@lists.febo.com To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.