Are you using DHCP on these hosts or something? Look at the route tables again. 168 has a route to use 155 as it's gateway for the 10.20.0.0/16 network, which as you describe the scene, is correct.
But, looking at the route table for the tinc node, it's ip address is 115, *not* 155. On Fri, Feb 5, 2010 at 5:06 PM, Anon <[email protected]> wrote: > Well, I'm back. I'm still trying to get a simple ping from a > non-tinc-node on a LAN to a tinc node on that same LAN. (I'm taking > baby steps.) > > I'll reprint the route prints below. > > To recap, tinc is running on 192.168.0.155, with a corresponding vpn > address of 10.20.30.1. This machine can ping 192.168.0.168 with no > problem. This machine can ping two offsite vpn nodes with no problem: > 10.20.40.1 and 10.20.50.1. And they can, in turn, ping 10.20.30.1. > > 192.168.0.168 can ping 192.168.0.155 with no problem. > > 192.168.0.168 can not ping 10.20.30.1. This is the problem I'm trying > to address. My goal, of course, is to allow all the computers on > 192.168.0.x to ping 10.20.30.1 (and 10.20.40.1 and 10.20.50.1), not > just 192.168.0.168. > > I previously posted the route prints from 192.168.0.155 and 192.168.0.168. > > I was told to add a static route to 192.168.0.168 as follows: > > route add 10.20.0.0 MASK 255.255.0.0 192.168.0.155 > > Tinc is NOT running on 192.168.0.168. > > On the hosts file for 192.168.0.155 (called myserv), the subnet used to be: > > Subnet = 10.20.30.1/32 > > I have now added the following line right below the above: > > Subnet = 192.168.0.0/24 > > The only thing I'm trying to accomplish at the moment is to ping > 10.20.30.1 from 192.168.0.168. > > If anybody can suggest a step I'm missing, I'd be appreciative. > > 192.168.0.168 > > =========================================================================== > Interface List > 0x1 ........................... MS TCP Loopback interface > 0x3 ...00 21 5c 59 d2 83 ...... Intel(R) Wireless WiFi Link 4965AGN - > Packet Scheduler Miniport > =========================================================================== > =========================================================================== > Active Routes: > Network Destination Netmask Gateway Interface Metric > 0.0.0.0 0.0.0.0 192.168.0.1 192.168.0.168 25 > 10.20.0.0 255.255.0.0 192.168.0.155 192.168.0.168 1 > 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 > 192.168.123.0 255.255.255.0 192.168.0.168 192.168.0.168 25 > 192.168.0.168 255.255.255.255 127.0.0.1 127.0.0.1 25 > 192.168.123.255 255.255.255.255 192.168.0.168 192.168.0.168 25 > 224.0.0.0 240.0.0.0 192.168.0.168 192.168.0.168 25 > 255.255.255.255 255.255.255.255 192.168.0.168 192.168.0.168 1 > 255.255.255.255 255.255.255.255 192.168.0.168 2 1 > 255.255.255.255 255.255.255.255 192.168.0.168 10006 1 > 255.255.255.255 255.255.255.255 192.168.0.168 20004 1 > Default Gateway: 192.168.0.1 > =========================================================================== > Persistent Routes: > None > > 10.20.30.1/192.168.0.155 > > =========================================================================== > Interface List > 0x1 ........................... MS TCP Loopback interface > 0x6 ...00 1a a0 32 88 28 ...... Broadcom 440x 10/100 Integrated > Controller - Packet Scheduler Miniport > =========================================================================== > =========================================================================== > Active Routes: > Network Destination Netmask Gateway Interface Metric > 0.0.0.0 0.0.0.0 192.168.0.1 192.168.0.155 20 > 10.20.0.0 255.255.0.0 10.20.30.1 10.20.30.1 30 > 10.20.30.1 255.255.255.255 127.0.0.1 127.0.0.1 30 > 10.255.255.255 255.255.255.255 10.20.30.1 10.20.30.1 30 > 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 > 192.168.0.0 255.255.255.0 192.168.0.115 192.168.0.115 20 > 192.168.0.115 255.255.255.255 127.0.0.1 127.0.0.1 20 > 192.168.0.255 255.255.255.255 192.168.0.115 192.168.0.115 20 > 224.0.0.0 240.0.0.0 10.20.30.1 10.20.30.1 30 > 224.0.0.0 240.0.0.0 192.168.0.115 192.168.0.115 20 > 255.255.255.255 255.255.255.255 10.20.30.1 10.20.30.1 1 > 255.255.255.255 255.255.255.255 192.168.0.115 192.168.0.115 1 > Default Gateway: 192.168.0.1 > =========================================================================== > Persistent Routes: > None > > > > On Wed, Feb 3, 2010 at 9:10 AM, Anon <[email protected]> wrote: > >> On .168 you need to add route 10.20.0.0 mask 255.255.0.0 192.168.0.155 > >> This need to be done persistent (-p) or after every boot. > > > >> Then try again ping 10.20.30.1 > > > > Did you see my latest message? It read: > > > > "This is what I tried: > > > > route ADD 10.20.0.0 MASK 255.255.0.0 192.168.0.155 > > > > This added the following line to the route table: > > > > 10.20.0.0 255.255.0.0 192.168.0.155 192.168.0.188 1 > > > > But ping fails." > > > > Is there a step I've missed? > > > _______________________________________________ > tinc mailing list > [email protected] > http://www.tinc-vpn.org/cgi-bin/mailman/listinfo/tinc >
_______________________________________________ tinc mailing list [email protected] http://www.tinc-vpn.org/cgi-bin/mailman/listinfo/tinc
