Did you start your tossim simulation (./build/pc/main.exe 1) ?
As long as TOSSIM has not started, SF will keep on giving that error. Once you start TOSSIM, error won't come and the packet count on the right hand side will start increasing. Tarun On 4/29/07, Chan kenniel <[EMAIL PROTECTED]> wrote:
How can I make sure the tossim is started? I haven't even used the Oscilloscope, I just used the SF to listen, but it said [EMAIL PROTECTED] died :-( On 4/29/07, Tarun Bansal <[EMAIL PROTECTED]> wrote: > Ensure that your TOSSIM simulation has started before you start > capturing packets. > Are you directly using Oscilloscope (without SF) for listening? > > Tarun Bansal > > On 4/29/07, Chan kenniel < [EMAIL PROTECTED]> wrote: > > dear all, > > > > I have followed you guys kind suggestion, and set the MOTECOM by using > > " export MOTECOM=tossim-serial", but what it returned to me is > > [EMAIL PROTECTED] died -- restarting > > I also used the serialforwarder, and it also had that problem, the server > > port is 9001 > > > > Still not work :-(, whyyyyyyy >.< > > > > Thanks for your answer. > > > > Regards, > > Kenneth > > > > > > On 4/28/07, Chan kenniel < [EMAIL PROTECTED]> wrote: > > > Dear all, > > > > > > I am new to tinyos, and I have encountered the following problem when I > > follow the instruction of this link > > > > > http://www.tinyos.net/tinyos-1.x/doc/tutorial/lesson6.html > > > > > > the quote text is from the website aboved > > > > > > " The 'listen' tool: displaying raw packet data > > > > > > The first step to establishing communication between the PC and the mote > > is to connect up your serial port cable to the programming board, and to > > make sure that you have Java and the javax.comm package installed. After > > programming your mote with the Oscilloscope code, cd to the tools/java > > directory, and type make > > > export [EMAIL PROTECTED]:baudrate > > > The environment variable MOTECOM tells the java Listen tool (and most > > other tools too) which packets it should listen to. Here > > [EMAIL PROTECTED]:baudrate says to listen to a mote connected to a serial > > port, where serialportis the serial port that you have connected the > > programming board to, and baudrate is the specific baudrate of the mote. For > > the mica and mica2dot motes, the baud rate is 19200, for the mica2 it is > > 57600 baud. You can also use a mote name as the baudrate (in which case that > > motes baudrate is selected). So you could do any of: > > > export [EMAIL PROTECTED]:19200 # mica baud rate > > > export [EMAIL PROTECTED]:mica # mica baud rate, again > > > export MOTECOM= > > > > > > [EMAIL PROTECTED]:mica2 # the mica2 baud rate, on a different serial port > > > export [EMAIL PROTECTED]:57600 # explicit mica2 baud rate > > > > > > Set MOTECOM appropriately, then run java net.tinyos.tools.Listen > > > You should see some output resembling the following: % java > > net.tinyos.tools.Listen > > > [EMAIL PROTECTED]:19200: resynchronising > > > 7e 00 0a 7d 1a 01 00 0a 00 01 00 46 03 8e 03 96 03 96 03 96 03 97 03 97 03 > > 97 03 97 03 97 03 > > > > > > > > > 7e 00 0a 7d 1a 01 00 14 00 01 00 96 03 97 03 97 03 98 03 97 03 96 03 97 03 > > 96 03 96 03 96 03 > > > 7e 00 0a 7d 1a 01 00 1e 00 01 00 98 03 98 03 96 03 97 03 97 03 98 03 96 03 > > 97 03 97 03 97 03 > > > The program is simply printing the raw data of each packet received from > > the serial port. > > > > > > Before continuning, execute unset MOTECOM to avoid forcing all java > > applications to use the serial port to get packets. If you don't have the > > javax.comm package installed properly, then the program will complain that > > it can't find the serial port. If you do not see that data lines on the > > screen, you may have chosen the wrong COM port or the mote may not be > > correctly connected to the computer. " > > > > > > > > > > > > I have followed what it tells me to do, but when I use the command I only > > see > > > % java net.tinyos.tools.Listen > > > [EMAIL PROTECTED]:19200: resynchronising > > > There's no the data line 7e 00 7d .... show up, it keeps listening, but > > listen nothing. Can anyone tell me what I did wrong please? Here is what I > > did: > > > > > > Noted: I have no mote plug in the computer, but I was wondering is it > > necessary? > > > 1) I went to /apps/Oscilloscope directory, and use command "make PC", > > after compile, I run by using " build/pc/main.exe 1" command, and in cygwin > > window, there's bunch of data flashing > > > out in the screen, which I think it's working. > > > > > > 2) then I move to another cygwin window, and go to /tools/java, then use > > command "make" > > > after making java, I export the port I want to listen which I used: > > > export MOTECOM= [EMAIL PROTECTED]:19200 > > > then I use > > > java net.tinyos.tools.Listen > > > > > > at this moment, nothing comes up. what did I do wrong? or did I miss > > something? > > > > > > Thanks a lot for your answer. > > > > > > > > > > > > > > > > > > -- > > > Best wishes, > > > Kenneth Chan > > > > > > ------------------------ > > > Wish you have a good day! > > > > > > > > -- > > Best wishes, > > Kenneth Chan > > > > ------------------------ > > Wish you have a good day! > > _______________________________________________ > > Tinyos-help mailing list > > Tinyos-help@Millennium.Berkeley.EDU > > https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help > > > -- Best wishes, Kenneth Chan ------------------------ Wish you have a good day!
_______________________________________________ Tinyos-help mailing list Tinyos-help@Millennium.Berkeley.EDU https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
