If that's the exact syntax you're giving as a command, the spaces are
wrongly placed. Use
make iris install.1 eprb,192.168.1.1
Regards,
Harri
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
Stefano "Kismet" Lenzi
Sent: Thursday, June 19, 2008 11:53 AM
To: Janos Sallai
Cc: TinyOS Help Mailing-List
Subject: Re: [Tinyos-help] avrdude for Iris and MIB600
On Thu, Jun 19, 2008 at 00:43, Janos Sallai <[EMAIL PROTECTED]>
wrote:
> Yes, it will work with the MIB600.
I have just double checked and if I try to execute the command:
make iris install.1eprb, 192.168.1.1
I get the following error:
"can't open device"
Do you have any tips?
>
> Janos
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of
> Stefano "Kismet" Lenzi
> Sent: Wednesday, June 18, 2008 5:08 PM
> To: TinyOS Help Mailing-List
> Subject: [Tinyos-help] avrdude for Iris and MIB600
>
> Does the patched avrdude work with MIB600? I have tested it and it did
> not work, should I use different parameters with make command rather
> then:
> make irs install.1 eprb,192.168.1.1
> which is the command that I unsuccessfully have used
>
> Thank you for help!
>
> Ciao,
> Stefano "Kismet" Lenzi
> _______________________________________________
> Tinyos-help mailing list
> Tinyos-help@millennium.berkeley.edu
> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-he
> lp
>
_______________________________________________
Tinyos-help mailing list
Tinyos-help@millennium.berkeley.edu
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
_______________________________________________
Tinyos-help mailing list
Tinyos-help@millennium.berkeley.edu
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
