I am wondering whether you programed the directly connected node as the base station (otherwise, it doesn't accept commands from the serial port). It doesn't seem that you did because you commented out "CFLAGS += -DDELUGE_BASESTATION" in your makefile.
Mike On Jan 18, 2010, at 12:20 PM, David Guillén wrote: > Hi all, > > I am using Deluge T2 with telosb motes. I would like to make my program's > code suitable for Deluge T2 because now it does not properly answer to Deluge > commands. The question is : Which differences must have an application to > work with Deluge T2? > > I have seen the differences between Blink and deluge/Blink and I tried to did > the same for BlinkToRadio. I can disseminate the image, but it does not > reboot using it. The main changes I made were: > > · BlinkToRadioAppc.nc. I added "components DelugeC" and the wiring > "DelugeC.Leds -> LedsC;" > > · Makefile. I added the lines I saw in Blink's Makefile --> > BOOTLOADER=tosboot > > #CFLAGS += -DDELUGE_BASESTATION > #CFLAGS += -DDELUGE_LIGHT_BASESTATION > > · Volumes. I copied both XML squemas (altough I only need the stm25p). > > Have you got any suggestion about mistakes I made or references to more > extensive information about creating Deluge T2 applications?? > > Thank you very much in advance. Kind regards, > David > _______________________________________________ > Tinyos-help mailing list > Tinyos-help@millennium.berkeley.edu > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help _______________________________________________ Tinyos-help mailing list Tinyos-help@millennium.berkeley.edu https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
