The setup is very simple, I am a Verizon FIOS customer and use a Set
Top Box (STB) controlled by the TiVo using Infra red (no cable cards
involved). The input to the STB is via coaxial cable. The STB is
connected to the TiVo using the composite A/V connectors (red, white,
yellow connectors). The TiVo is connected to the TV using coaxial cable.
The TV is tuned to channel 3.
Ken G.
Glen Farney wrote:
>
>
> Can you describe fully what setup you have, specifically what sources
> and how they are connected.
>
> Glen
>
> On Feb 27, 2010, at 7:04 PM, Ken Gunther <[email protected]
> <mailto:Yahoo_groups%40KenGunther.com>> wrote:
>
> Each morning when I turn on the TV my dual tuner series 2 TiVo is
> displaying the following message "Searching for signal on: Basic Cable
> In see 'messages & settings/troubleshooting' for info". In my channel
> settings I have told it that the only channels I receive are "box"
> meaning it needs to use my FIOS Set Top Box, all of the "cbl" channels
> (direct from cable) are disabled. Why is it looking for input directly
> off the cable? Is there somewhere else that I need to disable direct
> cable input?
>
> Ken G.
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/tivocentral/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/tivocentral/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
