woodnut;571705 Wrote: > Many thanks again John. > > > > > > > Is there a reason why the cable on the DC side should not be shielded? > Would there be any benefit in using a shield which is connected to > earth via the earth wire in the cable on the AC side? > > > Many thanks.
I do not believe you will notice any difference. An alternative approach is to twist the cables a la Kimber. By all means try it. Just be careful not to accidentally create a ground loop by linking the 0V DC to mains earth ( or to accidentally short out the unit by connecting +5V DC to earth!) -- Phil Leigh You want to see the signal path BEFORE it gets onto a CD/vinyl...it ain't what you'd call minimal... Touch(wired/XP) - TACT 2.2X (Linear PSU) + Good Vibrations S/W - MF Triplethreat(Audiocom full mods) - Linn 5103 - Aktiv 5.1 system (6x LK140's, ESPEK/TRIKAN/KATAN/SEIZMIK 10.5), Pekin Tuner, Townsend Supertweeters, Blue Jeans Digital,Kimber Speaker & Chord Interconnect cables Kitchen Boom, Outdoors: SB Radio, Harmony One remote for everything. ------------------------------------------------------------------------ Phil Leigh's Profile: http://forums.slimdevices.com/member.php?userid=85 View this thread: http://forums.slimdevices.com/showthread.php?t=79977 _______________________________________________ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch