Anton wrote: > Hi Triode > > This weekend I updated the firmware of my SB Touch, firstly with TT3, > followed by EDO after reading about it in this forum. I use the TOUCH > > S/PDIF coax > TacT 2.2 RCS Digital Preamplifier. In LMS, I carried out > the required changes regarding the file types, ensuring that PCM is set > to FLAC. I confirmed that the Digital Out only option is enabled on the > TOUCH, turned off WAN, made sure the buffer setting was 20000, locked > the volume, disabled the Analogue Out and turned off IR. In the advanced > settings on the TOUCH, when selecting the Digital Output option, no DACs > are listed, as expected, but the TOUCH is not seeing the RCS 2.2 either. > The TacT upsamples its digital output to 192 kHz into my BOZ digital > amplifiers, so I would think that it could handle 192 kHz input. The > maximum frequency that the RCS is getting from the TOUCH is 96 kHz. If I > play 192 hi-res files, they play very slowly and only at 96 kHz. I'm not > using the optical output, only the coax S/PDIF. The sound of my system > after the firmware upgrade has improved. The RCS is not a DAC: there's > no analogue pathway in my system, but S/PDIF is supported obviously. Any > suggestions?
Which version of the server and player firmware are you using - sounds like it may not be 7.8? If so wav playback above 96k will playback slowly as the player thinks the player will default to playing back at the wrong speed. ------------------------------------------------------------------------ Triode's Profile: http://forums.slimdevices.com/member.php?userid=17 View this thread: http://forums.slimdevices.com/showthread.php?t=94512 _______________________________________________ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch