Hi Triode This weekend I updated the firmware of my SB Touch, firstly with TT3, followed by EDO after reading about it in this forum. I use the TOUCH > S/PDIF coax > TacT 2.2 RCS Digital Preamplifier. In LMS, I carried out the required changes regarding the file types, ensuring that PCM is set to FLAC. I confirmed that the Digital Out only option is enabled on the TOUCH, turned off WAN, made sure the buffer setting was 20000, locked the volume, disabled the Analogue Out and turned off IR. In the advanced settings on the TOUCH, when selecting the Digital Output option, no DACs are listed, as expected, but the TOUCH is not seeing the RCS 2.2 either. The TacT upsamples its digital output to 192 kHz into my BOZ digital amplifiers, so I would think that it could handle 192 kHz input. The maximum frequency that the RCS is getting from the TOUCH is 96 kHz. If I play 192 hi-res files, they play very slowly and only at 96 kHz. I'm not using the optical output, only the coax S/PDIF. The sound of my system after the firmware upgrade has improved. The RCS is not a DAC: there's no analogue pathway in my system, but S/PDIF is supported obviously. Any suggestions?
------------------------------------------------------------------------ Anton's Profile: http://forums.slimdevices.com/member.php?userid=36424 View this thread: http://forums.slimdevices.com/showthread.php?t=94512 _______________________________________________ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch