Thanks very much, Josh. Agree with point about pin conflicts. But did i go to the wrong page? I want to use an esp32 not 8266. This is for the "0.01" versuon of the community project board.
Nov 15, 2021 1:11:29 PM Josh Wyatt <[email protected]>: > This is sort of an indirect response to your question, but my experience is > that the more complex and "featured" the dev board, the less consistent. For > example, for boards with onboard 18650 battery holders and Liion charger, > OLED display, and even onboard LEDs will be on different I/O ports. So my > guidance would be to choose the simplest boards available, which is sort of > antithetical to the "dev board" concept. > > I've had pretty good luck with consistency on the "wemos esp8266 clone" > boards, presumably because the Wemos D1 mini became very established with the > 8266; search on amazon for "esp32 d1 mini." Here's a link: > https://www.amazon.com/Bluetooth-Internet-Development-Functional-Ardu-ino/dp/B08MFCC4SR/?th=1 > > > You mentioned soldering footprint, and that one's not super friendly; but it > should be pretty consistent since the design tries to adhere to the original > ESP8266 Wemos D1 Mini form factor. > > You mentioned Amazon specifically, so I assume you're prototyping? > > Thanks, > Josh > > On Mon, Nov 15, 2021 at 11:38 AM Peter Soper via TriEmbed > <[email protected]> wrote: >> What esp32 dev board soldering footprint should be used on a board combining >> this with other stuff where it has to be 1) obtainable reliably 2) offer >> wifi and BT and 3) be cheap? I see many cheap on amazon. Are their pinouts >> de facto standard? And finally, anybody got an Eagle lib for this board? Or >> could you make and send me an .lbr for it? >> Thanks in advance. >> Pete >> _______________________________________________ >> Triangle, NC Embedded Computing mailing list >> >> To post message: [email protected] >> List info: http://mail.triembed.org/mailman/listinfo/triembed_triembed.org >> TriEmbed web site: http://TriEmbed.org >> To unsubscribe, click link and send a blank message: >> mailto:[email protected]?subject=unsubscribe >>
_______________________________________________ Triangle, NC Embedded Computing mailing list To post message: [email protected] List info: http://mail.triembed.org/mailman/listinfo/triembed_triembed.org TriEmbed web site: http://TriEmbed.org To unsubscribe, click link and send a blank message: mailto:[email protected]?subject=unsubscribe
