Stefan Roese <[EMAIL PROTECTED]> writes: > On Saturday 22 March 2008, Wolfgang Denk wrote: >> In message <[EMAIL PROTECTED]> you wrote: >> > I would prefer to move this init code not into the board code but into >> > the platform/cpu code. Speaking for PPC4xx, here all configuration I know >> > of have the same init code. And copying this into all board ports instead >> > on one place in the cpu directory seems "imperfect". >> >> But the ethernet configuration *is* actually bord dependent. A board >> may or may not use all the ethernet interfaces present on a >> processor, or it may have additional network controllers attached for >> example to the PCI bus, etc. > > So you vote for adding this code to more than 80 4xx boards that all would > use > the same code here? I don't like this. I would prefer one instance in the cpu > directory which could be overridden if needed by a board specific version.
Why not have both, a board and a CPU dependant init function like USB? Best regards Markus Klotzbuecher -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: [EMAIL PROTECTED] ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ U-Boot-Users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/u-boot-users
