On Sat, 12 Apr 2008, Fabio Estevam wrote: > I tried to load the kernel at 0x80800000, but this is > what I get: > Hit any key to stop autoboot: 0 > => run bootargs_base bootargs_nfs > => tftp 80800000 uImage > TFTP from server 10.29.244.101; our IP address is > 10.29.244.102 > Filename 'uImage'. > Load address: 0x80800000 > Loading: > ################################################################# > ########################### > done > Bytes transferred = 1339152 (146f10 hex) > => bootm > ## Booting image at 80800000 ... > Image Name: Linux-2.6.22 > Image Type: ARM Linux Kernel Image (uncompressed) > Data Size: 1339088 Bytes = 1.3 MB > Load Address: 80008000 > Entry Point: 80008000 > Verifying Checksum ... OK > OK > > Starting kernel ... > > Uncompressing > Linux............................................................. > ................................... done, booting the > kernel. > (then it freezes) > > I generated uImage manually by doing: > ./mkimage -A arm -O linux -T kernel -C none -a > 0x80008000 -e 0x80008000 -n 'Linux-2.6.22' -d zImage > uImage > > Used 0x80008000 to match the value of ZRELADDR in > /arch/arm/mach-mx3/Makefile.boot from Freescale Linux > BSP.
I'll just assume your uImage is correct - although I don't understand why you don't just do make uImage. Apart from that, verify that your console= command line parameter is correct, your machine ID matches, and that you don't have a jtag debugger like bdi2000 connected when you're trying to boot. Thanks Guennadi --- Guennadi Liakhovetski ------------------------------------------------------------------------- This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone _______________________________________________ U-Boot-Users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/u-boot-users
