Hi Fabio, Fabio Estevam schrieb: > Hi Jens, > > Have you tried to pass the "jtag=on" option into the kernel command line?
Yippee! This works. Thank you very much for this hint! Where is this parameter documented? I didn't found anything in linux/Documentation or with google. ... >> Apart from that, verify that your console= >>> command line parameter is correct, your machine ID >> matches, and that you >>> don't have a jtag debugger like bdi2000 connected >> when you're trying to >>> boot. >> I have the same problem on our board: I don't see the >> console outputs if >> the BDI2000 cable is connected to the target, although the >> BDI is in >> mode "reset run". Do have an idea why? Best Regards, Jens ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ U-Boot-Users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/u-boot-users
