Hi Jens, Have you tried to pass the "jtag=on" option into the kernel command line?
Regards, Fabio Estevam --- On Wed, 5/14/08, Jens Gehrlein <[EMAIL PROTECTED]> wrote: > From: Jens Gehrlein <[EMAIL PROTECTED]> > Subject: Re: [U-Boot-Users] Loading a kernel on MX31ADS using U-boot > To: "Guennadi Liakhovetski" <[EMAIL PROTECTED]> > Cc: u-boot-users@lists.sourceforge.net > Date: Wednesday, May 14, 2008, 4:08 AM > Hi Guennadi, > > Guennadi Liakhovetski schrieb: > > ... > > Apart from that, verify that your console= > > command line parameter is correct, your machine ID > matches, and that you > > don't have a jtag debugger like bdi2000 connected > when you're trying to > > boot. > > I have the same problem on our board: I don't see the > console outputs if > the BDI2000 cable is connected to the target, although the > BDI is in > mode "reset run". Do have an idea why? > > Best Regards, > Jens > > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2008. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > U-Boot-Users mailing list > U-Boot-Users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/u-boot-users ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
