Hi Andy,
could you please have a look at this patch?
The situation is that we don't understand why it's necessary - we
have verified that the correct register (RSTCR at IMMR+0xe00b0) is
updated with the correct value (0x2), but this doesn't cause a reset.
Documentation states that no other prerequisites or conditions are
required for hard reset to work.
We have the same problem in Linux, too.
This is on a custom MPC8548 board...
Any ideas what might be causing such behaviour and/or how to avoid
this?
Thanks in advance.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED]
The use of Microsoft crippleware systems is a sin that carries with
it its own punishment.
-- Tom Christiansen in <[EMAIL PROTECTED]>
-------------------------------------------------------------------------
This SF.net email is sponsored by the 2008 JavaOne(SM) Conference
Don't miss this year's exciting event. There's still time to save $100.
Use priority code J8TL2D2.
http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone
_______________________________________________
U-Boot-Users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/u-boot-users
