Hello,
In the U-Boot 1.3.3 there is already this patch included....
But I see another problem:
I uses the AT91SAM9260 microcontroller so I defined in the header:
#define CONFIG_AT91SAM9260 1
Instead of the Davicom Phy (RMII), which is used in the DevBoard
AT91SAM9260EK I want to use the Teridian Phy(MII), so I write in the header:
#undef CONFIG_RMII
Now have a look at the patch:
+#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \
+ defined(CONFIG_AT91SAM9263)
+ macb_writel(macb, USRIO, MACB_BIT(CLKEN));
#else
macb_writel(macb, USRIO, MACB_BIT(MII));
#endif
I don´t go to the line : macb_writel(macb, USRIO, MACB_BIT(MII));
,because of CONFIG_AT91SAM9260
BUT I have to go there or not ?
Thank you very much
Best regards
Manuel
Anatolij Gustschin schrieb:
Hello,
Manuel Sahm wrote:
I added a Teridian Phy Driver (tr78q21x3) to the Uboot version 1.3.0
It works. (even in linux when I use the linux generic macb driver)
If I try to use the latest u-boot-version (1.3.3) with the macb driver -
ethernet doesn?t work (in u-boot and linux).
I don?t know how to add my phy driver to the latest u-boot version !
Maybe it is not a phy driver problem? Teridian phy 78q21x3 supports only
MII mode. Reverse the following patch locally and check if ethernet works
again:
http://www.denx.de/cgi-bin/gitweb.cgi?p=u-boot.git;a=blobdiff_plain;f=drivers/net/macb.c;h=e5733f6e5b23c6ad7a05dfbda0b5a3d783f701f7;hp=6657d22926b55f4000c03095bb9b87af53247056;hb=8e429b3eee23927c1222679f6b6f53667b21595c;hpb=422b1a01602b6e2fbf8444a1192c7ba31461fd4c
Best regards,
Anatolij
-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users
