Hi Afzal, On Thursday 29 January 2009, Afzal Nadirshah wrote: > Is the Power On Self Test enabled for the canyonlands board?
A quick look at the canyonlands config header shows that it's not enabled. > What I > want to know is whether I need to set any macro while compiling, to enable > POST. Yes. I suggest you take a look at the kilauea.h header. Here POST is enabled by default. > I saw that there are some hot keys defined to start POST for certain > boards. Is there anything defined like that for canyonlands board.How do I > start the POST. Some POST tests are run always after poweron, and some (longer) tests are only run under certain conditions. doc/README.POST should give you an overview here. Best regards, Stefan ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: off...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot