Hi Stefan, Thanks for the reply. I looked into the file that you mentioned and also the README as well as the POST directory. I could not go into the details very minutely. From this I have understood that 1. Support for POST for canyonlands board is present. 2. To enable POST for canyonlands board, I only have to define the required macros. 3. I do not have to add / modify code to test the peripherals on the canyonlands board.
Could you please let me know if I have understood it correctly? Thanks a lot. I am hard pressed for time and your suggestions are invaluable. Regards, Afzal Nadirshah -----Original Message----- From: Stefan Roese [mailto:s...@denx.de] Sent: Thursday, January 29, 2009 9:17 PM To: u-boot@lists.denx.de Cc: Afzal Nadirshah Subject: Re: [U-Boot] Enabling POST for canyonlands board Hi Afzal, On Thursday 29 January 2009, Afzal Nadirshah wrote: > Is the Power On Self Test enabled for the canyonlands board? A quick look at the canyonlands config header shows that it's not enabled. > What I > want to know is whether I need to set any macro while compiling, to enable > POST. Yes. I suggest you take a look at the kilauea.h header. Here POST is enabled by default. > I saw that there are some hot keys defined to start POST for certain > boards. Is there anything defined like that for canyonlands board.How do I > start the POST. Some POST tests are run always after poweron, and some (longer) tests are only run under certain conditions. doc/README.POST should give you an overview here. Best regards, Stefan ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: off...@denx.de ===================================================================== http://www.mindtree.com/email/disclaimer.html _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot