Hi Marek, On Monday, February 25, 2013 7:19:54 PM, Marek Vasut wrote: > Implement u-boot.nand target that can be reused with a small amount of > churn across all CPU models. The idea is to delegate the u-boot.nand target > out of the main Makefile and into the CPU's Makefile (very similar to what > u-boot.imx does now). The main Makefile shall only contain path to which the > u-boot.nand target is delegated. Hopefully this will not produce too much > bloat in the main Makefile. > > To demonstrate this implementation, add u-boot.nand target for i.MX53. > > Signed-off-by: Marek Vasut <ma...@denx.de> > Cc: Benoît Thébaudeau <benoit.thebaud...@advansee.com> > Cc: Fabio Estevam <fabio.este...@freescale.com> > Cc: Stefano Babic <sba...@denx.de> > --- > Makefile | 18 ++++++++++++++++++ > arch/arm/imx-common/Makefile | 6 ++++++ > 2 files changed, 24 insertions(+) > > diff --git a/Makefile b/Makefile > index 41054b7..8b1010a 100644 > --- a/Makefile > +++ b/Makefile > @@ -470,6 +470,23 @@ $(obj)u-boot.img: $(obj)u-boot.bin > $(obj)u-boot.imx: $(obj)u-boot.bin depend > $(MAKE) -C $(SRCTREE)/arch/arm/imx-common $(obj)u-boot.imx > > +# > +# Generic u-boot.nand target. > +# > +# Every CPU that needs u-boot.nand must add a path to an implementation of > +# the actual u-boot.nand generator below. > +# > +ifdef CONFIG_MX53 > +CONFIG_NAND_TRG_PATH := $(SRCTREE)/arch/arm/imx-common > +endif > + > +$(obj)u-boot.nand: $(obj)u-boot.bin depend > + if [ "X$(CONFIG_NAND_TRG_PATH)X" = "XX" ] ; then > \ > + echo "This CPU does not support u-boot.nand target!" ; > \ > + exit 1 ; > \ > + fi > + $(MAKE) -C $(CONFIG_NAND_TRG_PATH) $(obj)u-boot.nand > + > $(obj)u-boot.kwb: $(obj)u-boot.bin > $(obj)tools/mkimage -n $(CONFIG_SYS_KWD_CONFIG) -T kwbimage \ > -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) -d $< $@ > @@ -857,6 +874,7 @@ clobber: tidy > @rm -f $(obj)u-boot.kwb > @rm -f $(obj)u-boot.pbl > @rm -f $(obj)u-boot.imx > + @rm -f $(obj)u-boot.nand > @rm -f $(obj)u-boot.ubl > @rm -f $(obj)u-boot.ais > @rm -f $(obj)u-boot.dtb > diff --git a/arch/arm/imx-common/Makefile b/arch/arm/imx-common/Makefile > index 5d5c5b2..71ea36f 100644 > --- a/arch/arm/imx-common/Makefile > +++ b/arch/arm/imx-common/Makefile > @@ -50,6 +50,12 @@ $(obj)u-boot.imx: $(OBJTREE)/u-boot.bin > $(OBJTREE)/$(patsubst "%",%,$(CONFIG_IMX > $(OBJTREE)/tools/mkimage -n $(filter-out %.bin,$^) -T imximage \ > -e $(CONFIG_SYS_TEXT_BASE) -d $< $@ > > +$(obj)u-boot.nand: $(obj)u-boot.imx > + ( \ > + echo -ne '\x00\x00\x00\x00\x46\x43\x42\x20\x01' ; \ ^ It does not work in my environment (Ubuntu 12.10). -ne is interpreted as text, so the FCB is broken. This is because /bin/sh (set to dash) is invoked by default on my machine here. It would work with the /bin/bash set by the main Makefile for SHELL, but this is not passed to the sub-make.
So what do you think we should do: 1) Add "export SHELL" to the main Makefile? 2) Move the SHELL assignment from the main Makefile to the top-level config.mk? 3) Set "SHELL=$(SHELL)" on the command line when invoking the sub-make? 4) Use printf instead of echo? 5) Something else? I like 1). Do you see possible side effects? I will add a patch for that in my v8 once we have made a choice if this choice is a global fix (i.e. 1 or 2). > + dd if=/dev/zero bs=1015 count=1 2>/dev/null ) | \ > + cat - $< > $@ > + > $(obj)SPL: $(OBJTREE)/spl/u-boot-spl.bin $(OBJTREE)/$(patsubst > "%",%,$(CONFIG_IMX_CONFIG)).cfgtmp > $(OBJTREE)/tools/mkimage -n $(filter-out %.bin,$^) -T imximage \ > -e $(CONFIG_SPL_TEXT_BASE) -d $< $@ Best regards, Benoît _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot