Currently when booting a mx6 solo processor get_cpu_rev() returns 0x62xxx, which
is an invalid mx6 CPU revision. This causes run-time problems when trying to use
VPU library in the kernel, as this library loads the VPU firmware according
to the CPU type.
Fix get_cpu_rev() so that it correctly returns 0x61xxx for a mx6 solo.
While at it, also remove the duplicate definitions for MXC_CPU_ types.
Tested on a Wandboard solo and on a mx6qsabresd.
Signed-off-by: Fabio Estevam <fabio.este...@freescale.com>
---
arch/arm/cpu/armv7/mx6/soc.c | 28 ++++++++++++----------------
arch/arm/imx-common/cpu.c | 16 ++++++++++------
arch/arm/include/asm/arch-mx5/sys_proto.h | 7 -------
arch/arm/include/asm/arch-mx6/sys_proto.h | 7 -------
4 files changed, 22 insertions(+), 36 deletions(-)
diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c
index 193ba12..87725eb 100644
--- a/arch/arm/cpu/armv7/mx6/soc.c
+++ b/arch/arm/cpu/armv7/mx6/soc.c
@@ -43,22 +43,18 @@ struct scu_regs {
u32 get_cpu_rev(void)
{
struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
- u32 reg = readl(&anatop->digprog_sololite);
- u32 type = ((reg >> 16) & 0xff);
-
- if (type != MXC_CPU_MX6SL) {
- reg = readl(&anatop->digprog);
- type = ((reg >> 16) & 0xff);
- if (type == MXC_CPU_MX6DL) {
- struct scu_regs *scu = (struct scu_regs *)SCU_BASE_ADDR;
- u32 cfg = readl(&scu->config) & 3;
-
- if (!cfg)
- type = MXC_CPU_MX6SOLO;
- }
- }
- reg &= 0xff; /* mx6 silicon revision */
- return (type << 12) | (reg + 0x10);
+ u32 fsl_system_rev;
+ u32 cpu_rev = readl(&anatop->digprog);
+
+ /* Chip Silicon ID */
+ fsl_system_rev = ((cpu_rev >> 16) & 0xFF) << 12;
+ /* Chip silicon major revision */
+ fsl_system_rev |= ((cpu_rev >> 8) & 0xFF) << 4;
+ fsl_system_rev += 0x10;
+ /* Chip silicon minor revision */
+ fsl_system_rev |= cpu_rev & 0xFF;
+
+ return fsl_system_rev;
}
void init_aips(void)
diff --git a/arch/arm/imx-common/cpu.c b/arch/arm/imx-common/cpu.c
index a9b86c1..2f518c5 100644
--- a/arch/arm/imx-common/cpu.c
+++ b/arch/arm/imx-common/cpu.c
@@ -117,15 +117,19 @@ unsigned imx_ddr_size(void)
#if defined(CONFIG_DISPLAY_CPUINFO)
+#define MXC_CPU_MX51 0x51
+#define MXC_CPU_MX53 0x53
+#define MXC_CPU_MX6SL 0x60
+#define MXC_CPU_MX6DL_S 0x61
+#define MXC_CPU_MX6Q_D 0x63
+
const char *get_imx_type(u32 imxtype)
{
switch (imxtype) {
- case MXC_CPU_MX6Q:
- return "6Q"; /* Quad-core version of the mx6 */
- case MXC_CPU_MX6DL:
- return "6DL"; /* Dual Lite version of the mx6 */
- case MXC_CPU_MX6SOLO:
- return "6SOLO"; /* Solo version of the mx6 */
+ case MXC_CPU_MX6Q_D:
+ return "6Q/D"; /* Quad/Dual version of the mx6 */
+ case MXC_CPU_MX6DL_S:
+ return "6DL/S"; /* Dual-Lite/Solo version of the mx6 */
case MXC_CPU_MX6SL:
return "6SL"; /* Solo-Lite version of the mx6 */
case MXC_CPU_MX51:
diff --git a/arch/arm/include/asm/arch-mx5/sys_proto.h
b/arch/arm/include/asm/arch-mx5/sys_proto.h
index 93ad1c6..a2e88bb 100644
--- a/arch/arm/include/asm/arch-mx5/sys_proto.h
+++ b/arch/arm/include/asm/arch-mx5/sys_proto.h
@@ -24,13 +24,6 @@
#ifndef _SYS_PROTO_H_
#define _SYS_PROTO_H_
-#define MXC_CPU_MX51 0x51
-#define MXC_CPU_MX53 0x53
-#define MXC_CPU_MX6SL 0x60
-#define MXC_CPU_MX6DL 0x61
-#define MXC_CPU_MX6SOLO 0x62
-#define MXC_CPU_MX6Q 0x63
-
#define is_soc_rev(rev) ((get_cpu_rev() & 0xFF) - rev)
u32 get_cpu_rev(void);
unsigned imx_ddr_size(void);
diff --git a/arch/arm/include/asm/arch-mx6/sys_proto.h
b/arch/arm/include/asm/arch-mx6/sys_proto.h
index 3193297..0278317 100644
--- a/arch/arm/include/asm/arch-mx6/sys_proto.h
+++ b/arch/arm/include/asm/arch-mx6/sys_proto.h
@@ -24,13 +24,6 @@
#ifndef _SYS_PROTO_H_
#define _SYS_PROTO_H_
-#define MXC_CPU_MX51 0x51
-#define MXC_CPU_MX53 0x53
-#define MXC_CPU_MX6SL 0x60
-#define MXC_CPU_MX6DL 0x61
-#define MXC_CPU_MX6SOLO 0x62
-#define MXC_CPU_MX6Q 0x63
-
#define is_soc_rev(rev) ((get_cpu_rev() & 0xFF) - rev)
u32 get_cpu_rev(void);
const char *get_imx_type(u32 imxtype);
--
1.7.9.5
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
