Dear JPT, On Wed, 03 Apr 2013 10:13:02 +0200, JPT wrote: > | \/ | __ _ _ ____ _____| | | > | |\/| |/ _` | '__\ \ / / _ \ | | > | | | | (_| | | \ V / __/ | | > |_| |_|\__,_|_| \_/ \___|_|_| > _ _ ____ _ > | | | | | __ ) ___ ___ | |_ > | | | |___| _ \ / _ \ / _ \| __| > | |_| |___| |_) | (_) | (_) | |_ > \___/ |____/ \___/ \___/ \__| > ** MARVELL BOARD: DB-88F6282A-BP LE > > U-Boot 1.1.4 (Feb 6 2012 - 14:40:46) Marvell version: 3.4.27 > Netgear version: Uboot-1_1_4-NetgearDUOV3-V1008
On Marvell hardware, you can send a different U-Boot using the serial port, even if the on-flash U-Boot is broken. Have a look at tools/kwboot.c in the mainline U-Boot sources. It uses the serial port to send using the Xmodem protocol, a new U-Boot payload to the Kirkwood SoC. Best regards, Thomas -- Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot