Hi Thomas, On Sun, 7 Apr 2013 10:08:22 +0200, Thomas Petazzoni <thomas.petazz...@free-electrons.com> wrote:
> Dear Albert ARIBAUD, > > On Thu, 4 Apr 2013 14:47:18 +0200, Albert ARIBAUD wrote: > > > Since you seem to have a binary meant for UART booting, yes, you might > > try sending it to the board; with any luck that'll allow you to inspect > > and possibly revert your U-Boot environment into what it was before the > > bricking. As to how... any serial app with Xmodem should work, I > > presume. If the transfer starts, chances are the image will run > > automatically. > > No, any app doing Xmodem will not work. In order to turn the Marvell > Kirkwood romcode into UART boot mode, you have to send a series of > magic bytes to the UART. This is what kwboot does before sending the > binary using the Xmodem protocol. Thanks for the correction -- however, it was done already in a private e-mail exchange with JPT, where indeed the requirement became "any app which can send files in raw as well as xmodem modes". > Best regards, > > Thomas Amicalement, -- Albert. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot