Hi Benoît, On Mon, Apr 8, 2013 at 3:55 PM, Fabio Estevam <feste...@gmail.com> wrote: > Hi Benoît, > > On Mon, Apr 8, 2013 at 3:47 PM, Benoît Thébaudeau > <benoit.thebaud...@advansee.com> wrote: > >> Did you have a chance to perform this test? > > I have built v10 bundle and will have access to my mx31pdk tomorrow morning. > > Will let you know the results.
Just tested v10 on mx31pdk. As reported in v9 I start to get reboots and never reach the prompt. Then I disabled watchdog options in mx31pdk.h and I get the following: U-Boot 2013.04-rc1-14135-gab21c72-dirty (Apr 09 2013 - 09:23:01) CPU: Freescale i.MX31 rev 2.0 at 532 MHz. Reset cause: POR Board: MX31PDK DRAM: 128 MiB NAND: 256 MiB In: serial Out: serial Err: serial Net: (Board hangs here). When I tested v9 and removed watchdog support I was able to get into the U-boot prompt. Regards, Fabio Estevam _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot